User manual

12
1 Fill the water reservoir with cold tap water
beyond the MIN level (1). Put the lid on it (2)
and put it the water reservoir back onto the
machine.
2 Put the 1-cup pod holder q or the 2-cup pod
holder qq in the machine without pods.
3 Close the lid and lock the lever.
4 Put two cups or a large mug under the coffee
spout to collect the water.
3 Press the 1-cup button to make the coffee
ow into the cup (1). When the cup contains
the amount of coffee you prefer, press the
1-cup button again (2). Your preferred amount
of coffee has been set.
From now on, your SENSEO
®
machine brews one
or two cups with this amount of coffee when you
select the personal coffee memory symbol with
the selection button.
D
Note:
If you want to change the set amount of coffee,
simply perform steps 1-4 again.
5.2 Flushing the machine after
a day of non-use
If you have not used the coffee machine for one
day, ush it to make sure that the boiler is lled
with fresh water.
To ush the machine, brew two cups of hot
water in the following way: