User manual

20
Problem Solution
Make sure that you have placed the coffee pod or pods properly in the
centre of the pod holder, to prevent water from escaping along the edge
of the pod or pods. When you use two coffee pods on top of each other,
make sure that the convex sides of both pods point downwards and press
the pods lightly into the pod holder.
Make sure that you have not used the same coffee pod twice by accident.
Make sure that the coffee in the pod is evenly distributed.
If you prefer a more robust avour, SENSEO
®
coffee pods with a stronger
blend are available.
The coffee is not hot
enough.
If you have used the machine for quite some time and the temperature of
the coffee decreases, we advise you to descale the machine. See chapter
‘Descaling’. Descale your SENSEO
®
coffee machine regularly.
Do not use cups that are too large, as they cause the coffee to get cold
more quickly. Make sure that the cups have a capacity of at least 150ml.
Use thin-walled cups. Thin-walled cups absorb less heat from the coffee than
thick-walled cups.
Make sure the size of the cup matches the amount of coffee. Do not brew a
small amount of coffee in a large cup.
If you drink coffee with fresh milk, preheat the milk in the cup in a
microwave.
You can preheat the coffee machine by rst brewing a cup of coffee without
placing a coffee pod in the pod holder. In this way you also heat up your
coffee cup.
The touch panel does
not work.
If there is water on the touch panel, the buttons do not work. Make sure
that the touch panel is dry and also make sure your hands are dry when
you use the touch panel.
Make sure that you press the selection button and not the symbols to the
left of the selection button.
I accidentally activate
the touch panel when
I clean it.
This happens because the touch panel is very sensitive and the buttons
only require a light touch to be activated. There is no problem when this
happens, the machine will not start brewing coffee.
Unplug the machine before you clean it.