User Manual

5
7. For additional security, tighten the locking screw by turning
it clockwise.
8. Install a filter into the holder by sliding it into position
between the film clips. Due to the snug fit, the filter may
have to be slightly jiggled to glide into the clips.
Note: Do not use excessive force that can damage the filter or
the holder.
Note: When rotating the filter holder, friction from the locking
pin may cause some noise. This is normal and will not affect the
performance of the FH-100-U.
Once the filter is installed, its position can be adjusted for
optimum performance by sliding it up and down or rotating it.