User's Manual

Quick start guide
insert camera into
compartment
plug in camera connector to camera plug
close camera
compartment lid
Step 3: Install the camera
Install the camera into the payload bay⁷ within the eBee and close the camera
compartment lid. If the camera connector is not already connected, plug it into
the connector with the icon on the eBee.
Caution: The eBee has not been designed to fly without the camera.
Attemptingto fly without the camera may render the drone unstable,
which may eventually lead to a crash.
⁷ Some payloads may require a separate battery or SD card to operate properly. Please refer to the
User Manual of the camera or other payload for proper installation instructions.
32