How-To Guide

Barcode setting & other functions:
1. How to switch scan mode.
(1) Press the finger trigger button for 5seconds. (onetime <-> Auto)
(2) You can change the mode after touching the APP screen.
2. Setting value of Auto mode.
(1) No read barcode, Barcode engine will be transferred to the sleep mode after 5sedonds.
=> Power is turned on once the object is recognized.
(2) It takes 0.1sec the next reading of barcode.
(3) When first barcode scanning, sound and vibration will be acting. After that, when
reading the duplicate barcode, only vibration will sound.
(Currently, there are sound and vibration whenever scanning based on ‘OneTime’ mode.
-> Can be changed.)
3. Legible barcode (symbology) type.
(1) QR Code
(2) All Symbology
If necessary, can be optimize to scan specific symbology only.