User Guide

Info > Service
Page 37 of 49
System
1. Your KP2 uses true vehicle speed
data from the vehicle bus as a Speed
Source whenever possible. Without
vehicle speed data, the device will
use GPS-sourced speed to inform
related calculations (e.g., ADAS).
2. Set a preferred Speed Unit.
3. Set your device’s audio levels by
choosing a Speaker Volume.
4. Select the type of in-cabin alerts for
ADAS/DSM events. Either Beep or
Voice 1.
5. Pair your KP2 with a wireless
Bluetooth Panic button. Find setup
specifications on page 8 of the KP2
User Guide. To find more detailed
instructions, follow this link. These
instructions still apply, despite being
for CP2.
6. Use your Bluetooth Button
Function as an external Panic
Button or for Emergency Call
triggers.
7. Set your device’s small black Button
Function.