User Guide

Event > DSM
Page 33 of 49
6. Specify a threshold to enable auto
calibration functions via Auto
Calibration Minimum Speed. It is
recommended to set a speed above
30 km/h to improve calibration
accuracy.
7. Choose the Auto Calibration Time
for your camera (30 sec
recommended).
8. To set a threshold for the device auto
re-calibration period, select an Auto
Calibration Interval.
DSM Type
9. To assign various DSM triggers,
check behaviors like Fatigue.
10. Set a Sensitivity % and the time
necessary to trigger an alert.
• Example: Fatigue events trigger
when eyelid closure occurs for 3 or
more seconds or if yawning
exceeds 50% (2.5 cm) for the
same period.
Note: Review details about other
settings, such as Multiple Event
Escalation Time,
here. Despite these
values being ADAS settings, the logic
is the same.