User Guide
Table Of Contents
- 1 Welcome to Your KP2 Configuration Guide
- 2 KP2 Configuration Tool Installation
- 3 Configuration Tool Layout & Settings
- 4 Configuring Your Device
- 5 Finishing Up/Support
Event > DSM
Page 32 of 49
5. To manually mark a driver’s head
area, click Manual Detect. Only use
this feature if the driver’s head
position is fixed.
• Use the pop-up window to specify
the area and click OK.
Yaw Deviation calculates
automatically once the driver’s head
area is set.
Pitch Deviation calculates
automatically once the driver’s head
area is set.