User Guide

Event > DSM
Page 31 of 49
DSM
1. Activate DSM event capabilities by
clicking Use. This gives you access to
enable DSM events and change
individual settings independently.
2. Limit DSM events to a specified range
by setting Speed values.
Note: Changing minimum speed
values within the speed range affects
the device’s autocalibration
capabilities. Ensure the minimum
DSM Speed value does not exceed
the Auto Calibration Minimum
Speed.
Head Area/Camera Position
You may automatically or manually
set a driver’s position. See steps 3-5
for automatic or step 6 for manual
calibration.
3. To automatically recalibrate a driver’s
head and camera position for DSM
event detection, click Auto
Calibration.
4. Select the Driver Position in the
vehicle.