User Guide

Event > ADAS
Page 27 of 49
ADAS Type
4. Click HMW to activate the event type.
5. To set the amount of time your
vehicle must be within a
speed/distance window to trigger an
event, select a Sensitivity.
6. Establish the Speed range for event
activation. The configurable threshold
must be surpassed for HMW in each
speed window. Within this window,
events will trigger.
7. Set the Distance threshold. An event
triggers if this distance, measured
from the front end of the driver’s
vehicle to the rear of the vehicle
ahead, is breached and the speed
threshold is surpassed.
8. To determine the conditions for in-cabin
alerts, select a Speaker setting. All
plays Lv1 and Lv2 audio alerts.
Note: You can determine the type of
sound received by drivers
here.
9. Define a time, or Detect Interval, during
which KP2 disregards repeated event
instances.
• Example: If the interval is set to 10
sec, and an event triggers
continuously for 10 sec, only one
event is delivered.