User Guide
Table Of Contents
- 1 Welcome to Your KP2 Configuration Guide
- 2 KP2 Configuration Tool Installation
- 3 Configuration Tool Layout & Settings
- 4 Configuring Your Device
- 5 Finishing Up/Support
Event > Misc.
Page 21 of 49
Panic Button
1. Determine your Panic Button
response settings.
2. To obscure camera channels 1 and 2
during Panic events, check Mask CH.
3. To prevent the device’s audio
recording during Panic events, check
Mask Audio.
Overspeed
4. Set your speed threshold for
recording Overspeed events by
entering a Speed Limit.
• This accounts for vehicle speed
only, not posted speed limits.
5. Turn on audible alerts for Overspeed
events by clicking Speaker.