User Guide
Table Of Contents
- 1 Welcome to Your KP2 Configuration Guide
- 2 KP2 Configuration Tool Installation
- 3 Configuration Tool Layout & Settings
- 4 Configuring Your Device
- 5 Finishing Up/Support
Record
Page 14 of 49
5. Set the Continuous+Event ratio of
video data recording (applicable only
when you set Continuous+Event
record mode).
6. Select your Pre-Event setting to
determine the amount of time video
records before an event
7. To set the amount of time video
records after an event, select a Post-
Event setting.
8.
Parking Mode reduces your camera’s
FPS to 1 when your vehicle is idle for
5 min.
• Click Record Audio to turn on the
device’s internal microphone for
audio recording.
• Click By Panic to trigger audio
recordings only when you press the
panic button. In this case, audio
records for 2 minutes.