User Guide

Device
Page 10 of 49
Camera
1. Activate your road-facing camera
channel, CAM2. A KP2 driver-facing
camera is required. Deactivating
CAM2 removes the ability to change
video channel settings in the
Record
tab and DSM settings in the DSM tab.
Power Connection
2. To automatically apply appropriate
power settings, select the device
power Type. Using KP2-Cig-PWR
prevents access to Power On/Off
settings.
3. Manually adjust these values to your
preferred ACC On Voltage 12v and
ACC On Voltage 24v.
4. To continue device operations for a
limited period when ACC is off, select
a Delayed ACC Off.
Note: ACC On Voltage 12v, ACC
On Voltage 24 and Delayed ACC
Off are only available for the KP2-
OBD-PWR type.