User Guide

12
Sensata INSIGHTS
AP User Guide
Mobile application user guide
STEP 
Tap Connect to Camera.
If you’ve established a Wi-Fi
connection with the camera,
“Connection Status:
Connected” will appear at
the top of the screen. Before
adjusting settings, select
Download Settings From
Camera. After receiving
conrmation, tap OK.
STEP 
Tap Adjust Settings/
Preferences to open the
Settings page. Make setting
adjustments in each section
as needed.
Important: Ensure you
use precise vehicle
measurements in ADAS
settings, as exact values
are crucial to its function.
Similarly, mark “Horizon”
and “Hood” lines properly.
STEP 
After adjusting settings,
navigate back to the Main
Menu and tap Upload
Settings to Camera. When
prompted, tap Ye s to
continue. If the upload is
successful, you’ll see a
conrmation message. Tap
OK. You have completed
calibration. Your AP1 will
reboot and incorporate your
new settings.
Important: Please ensure you
maintain regular updates
with your AP1 to ensure it
runs on the most recently
released rmware.