AP1 Please read this entire guide before installation and use. User Guide Version 3 | Last updated 1/1/2023 INSIGHTS sensatainsights.
Sensata INSIGHTS AP1 User Guide Table of Contents Please read this entire guide before installation and use. AP1 User Guide Package contents ...........................................................................3 Key functions ....................................................................................4 ADAS functions ...............................................................................5 Driver safety warnings ..................................................................
Sensata INSIGHTS AP1 User Guide Package contents 3M Tape 3M tape Power Specifications Input: OBDII DC 10~32V, 2A Output: DC 5V, 3A Camera Lock Cap Speaker Camera MicroSD & SIM Card Slot Panic Button Multifunction Button Volume Control Button Status LED (3 EA) 1.2.
Sensata INSIGHTS AP1 User Guide Key functions Automatic Booting Once the AP1 has been wired to your OBDII port or vehicle power source, the AP1 will boot up automatically. It will take around 55 seconds for the unit to be ready to operate. 1. Video recording Continuous record This is the default mode for recording. Your AP1 begins recording after booting up and continues to record the entire time the device is on.
Sensata INSIGHTS AP1 User Guide ADAS functions Your AP1’s Advanced Driver Assistance Systems (ADAS) features allow drivers to receive in-cabin preventive audio alerts in cases of potential incidents. LDW Lane Departure Warning Your vehicle crosses a solid lane line on either side of the road. Forward Collision Warning Your vehicle is likely to collide with something in front of the vehicle.
Sensata INSIGHTS AP1 User Guide Driver safety warnings Disclaimer Operational concerns The AP1 is not a substitute for a safe, conscientious In certain conditions, including inclement weather, driver. The AP1 cannot compensate for a driver who is low visibility and certain road conditions (including poor distracted, inattentive or impaired by fatigue, drugs or lane markings, construction zones, dirt roads, heavy alcohol.
Sensata INSIGHTS AP1 User Guide GPS reception When satellites don’t have line of sight, cellular towers help triangulate a vehicle’s location. Improve your signal Reception may be impaired: 1. Activate your AP1 in an area 1. If your vehicle has metallic elements on the windshields. without large buildings. 2. The optimum operating 2.
Sensata INSIGHTS AP1 User Guide LEDs & buzzer specifications LED Status/step 1 2 3 3 colors Green Blue Sound Startup & power off Record Booting step 1 Before troubleshooting Flashing (orange) Off Off Booting step 2 Troubleshooting Flashing (orange) Flashing Off Booting step 3 Initializing modem Flashing (orange) Flashing Flashing Booting finished On On On Power on Normal: On (green) Off Off Power off/finished Off Off Off Recording - On - G-sensor recording - On -
Sensata INSIGHTS AP1 User Guide Technical specifications Mechanical Size 122 x 95.5 x 15.5 mm Weight 212 g Image Sensor 1/2.9 Inch CMOS Image Sensor Angle of View FOV(D) 128° Electrical Input OBDII DC 10V~32V, 2A Output DC 5V, 3A Power Consumption Max. 750mA/12V (9.0W) Supercapacitor 2.
Sensata INSIGHTS AP1 User Guide Installation resources The AP1 is a self-install device for a vehicle’s OBDII connection. Please reference the AP1 install material and find access to the AP1 Mobile App on https://smartwitness.com/ap1-setup. If you need to schedule a fee-based professional installation service, please contact smartwitness.com/request-install and submit the online form.
Sensata INSIGHTS AP1 User Guide Mobile application user guide The AP1 Calibration Tool allows customization of AP1 settings on either Apple or Android devices. If you have installed AP1s, are familiar with its settings or require specific changes, use Advanced Setup. Adhere to the Guided Setup in any other case. The following features the AP1 Tool Advanced Setup. Find Guided Setup instructions in the Quick Start Guide. STEP 1 STEP 2 STEP 3 Turn on your vehicle. Wait for the AP1 to boot up.
Sensata INSIGHTS AP1 User Guide Mobile application user guide STEP 5 Tap Connect to Camera. If you’ve established a Wi-Fi connection with the camera, “Connection Status: Connected” will appear at the top of the screen. Before adjusting settings, select Download Settings From Camera. After receiving confirmation, tap OK. STEP 6 Tap Adjust Settings/ Preferences to open the Settings page. Make setting adjustments in each section as needed.
Sensata INSIGHTS AP1 User Guide Technical support & warranty Technical support For technical support, please contact your local distributor or visit our Support Portal and submit a support ticket. You can also email us at support@smartwitness.com or call our support team: North America, South America, APAC +1 (312) 981-8774 EMEA +44 (0) 1483 397005 Limited warranty This product is supplied separately with a 2-year limited hardware warranty.
Sensata INSIGHTS AP1 User Guide Safety advice & FCC regulations FCC Part 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, Caution To reduce the risk of electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel. and (2) this device must accept any interference received, including interference that may cause undesired operation.
Sensata INSIGHTS AP1 User Guide AP1 ADAS disclaimer To properly activate and utilize AP1’s ADAS features, Sensata INSIGHTS recommends installation using OBDII data or JBUS connection. Vehicle-sourced speed data retrieval through these means is integral to accessing vehicle speed for precise ADAS notifications. For installations (ex: 3-Wire) without vehicle data retrieval or in instances where speed is unobtainable from the vehicle, AP1 defaults to GPS speed measurement in the operation of ADAS features.
INSIGHTS 16 © 2023 Sensata INSIGHTS. All Rights Reserved. sensatainsights.
