Installation Guide

3. Watch the installation video.
Refer to proper camera installation
guidelines here.
2. Scan the QR code inside the box for
a detailed installation video,
spec sheet and user guide.
9. Plug main cable into your vehicle’s
OBDII port. Turn on vehicle. LED
sequence will begin. Look for all
3 solid LEDs.
11. Scan the QR code above to nd
and download the app.
1. Review the package contents.
4. Use wipe to clean the window.
Allow time to dry. To determine
compliant device placement,
check local regulations.
10. Hold center button on AP1
camera unit for 5 seconds. Release
button, and wait 3 seconds for blinking
orange light.
5. Remove backing, then press
evenly to ensure unit is ush
against the glass. Hold to window
for 30 seconds.
6. Connect AP1 unit wire to main
cable harness.
7. Remove adhesive backing on clips,
and adhere cable to windshield.
8. Tuck cable behind weather stripping,
and push stripping in to secure it.
A.
D.
B.
E. F.
C.
Use the appropriate QR code to
download the AP1 Calibration Tool
A. AP1 Camera
B. Camera Angle Cover
C. Locking Screw Tool
D. Alcohol Wipe
E. Clips
F. Cable
Standard Kit
Quick Start Installation Guide
For AP1 Video Telematics Camera
Proceed to next page for device calibration >
sensatainsights.com
INSIGHTS