User Guide
11SMARTWITNESS AP1 USER GUIDE
The following features the AP1 Tool Advanced Setup.
Find Guided Setup instructions in the Quick Start Guide.
The AP1 Calibration Tool allows customization of AP1 settings
on either Apple or Android devices. If you have installed AP1s,
are familiar with its settings or require specific changes, use
Advanced Setup. Adhere to the Guided Setup in any other case.
STEP 2
Press the middle button for
5 seconds. Wait 3 seconds.
The orange LED light will
start blinking. Now, open
the Calibration Tool.
STEP 3
Choose Advanced Setup. Notice the buttons —
these oer clarification and supplemental process
details. To connect the app to your AP1, select
Go to your Wi-Fi Settings.
STEP 1
Turn on your vehicle. Wait for the AP1 to boot up.
You will see the following LED sequence:
Blinking red; red and green; green; green and blue.
All 3 LEDs solid = ready.
Note: A blinking blue light means your device is
attempting to establish a network connection. If the
issue persists, contact your service provider.
STEP 4
In your settings, tap the AP1
Wi-Fi name (AP1****). The
Wi-Fi password is the last 8
digits of your IMEI #, found
either on the camera or the
box label.
MOBILE APPLICATION
USER GUIDE