Product Manual

1. GENERAL
1.01 Dimensions inverters have been
designed and manufactured for many user
applications and long life. They utilize pat-
ented construction methods and high
technology electronic parts and circuitry.
1.02
CAUTION: Inverters produce haz-
ardous voltages, to avoid risk of harm or
fire the unit must be properly installed.
There are no user serviceable parts inside,
do not remove the cover.
CAUTION: The inverter should not be
mounted in a location that may be exposed
to rain or spray.
CAUTION: The inverter should not be
installed in a zero clearance enclosure.
CAUTION: Damage to the inverter will
occur if correct polarity is not observed
when installing the DC input cables.
CAUTION: Damage to the inverter will
occur if an external AC power source is
applied to the inverter’s AC output or its
hardwire output.
CAUTION: The inverter contains a circuit
breaker and capacitor that may produce a
spark. Do not mount in a confined battery
or gas compartment.
CAUTION: Working in the vicinity of lead-
acid batteries is dangerous. Batteries
generate explosive gases during operation.
There is a risk of acid exposure. There is
also a risk of high current discharge from
shorting the battery that can cause fire and
explosion.
CAUTION: Be sure the inverter and, if
used, the external AC input circuit breaker
or fuse are turned
"OFF" during installation.
2. DESCRIPTION
Inverter Rating
Inverter Input Output
Model (VDC) (ADC) (VAC) (Watts)
24/2200N 25.2 Up to 110 120 2200
24/3300N 25.2 Up to 165 120 3300
24/4800N 25.2 Up to 240 120 4800
2.01 The inverter converts 24 VDC to 120
VAC, 60 HZ, having a pure-sine wave form.
2.02 The inverter has internal protection
against output short circuit, output overload
and high temperature conditions. Also,
there is a thermally controlled cooling fan.
2.03 The inverter is designed to operate
any 120 VAC, 60 HZ single phase appliance,
equipment or tool within its power ratings.
2.04 The battery charger ("B1" option)
has sophisticated, patented recharge
detection circuitry to ensure complete
battery charging. It is fully automatic and
regulated, and is temperature compen-
sated.
3. INSTALLATION
3.01 The following instructions should be
thoroughly read and understood before
installation.
3.02 CAUTION: Inverters produce haz-
ardous voltages, to avoid risk of harm or
fire the unit must be properly installed.
CAUTION: Damage to the inverter will
occur if correct polarity is not observed
when installing the DC input cables.
Page 2
OWNERS MANUAL
FOR SENSATA TECHNOLOGIES
DIMENSIONS INVERTERS
Model 24/2200N
Model 24/3300N
Model 24/4800N
Including Options: A, B1, D, R, T
Table of Contents
Page
1. General . . . . . . . . . . 2
2. Description . . . . . . . . 2
3. Installation . . . . . . . . 2
4. Start Up/Operation. . . 5
5. Troubleshooting. . . . . 5
6. Installation Figure 1 . . 7
7. Limited Warranty. . . . 8