Product Manual

7
(8) Display, Inverter On/Off, Remote: The display will give you current
status information as well as allow you to turn the inverter On and Off.
This panel can be used as a remote with the remote kit.
(9) Battery Type Selector Switch: Slide this switch to match the type of
batteries that you are using for battery proper charging.
(10) Status LED: This LED will show the operation mode of the inverter and
charger. The LED also shows troubleshooting information. See the table in
the troubleshooting section at the rear of the manual for further operation
mode descriptions.
(11) Remote ON/OFF Tab: Use this tab if you wish to wire an inverter remote
control switch. NOTE – The LCD Panel can also be relocated as a remote.
Order remote LCD panel kit# 625000.
1
234
5
7
8
6
9 10 11