Product Manual

Other Design Features: thermally controlled cooling fan, GFCI outlet protection,

and Remote LED Display Panel or “On/Off” switch hookup.

Unit Protection: Automatic electronic short circuit/overload protection,

Automatic over temperature shutdown, and AC output circuit breaker(s).

Battery Protection: Automatic low battery shutdown at 10.5VDC with in-rush

delay.

Temperature Compensated Charging: Allows for proper temperature charging

across the operating range of the inverter.

Auto Sleep Mode: When the LED Display Panel is used, the inverter can be

programmed to go to sleep after no load is detected over programmed interval.

Optional LCD Remote: For an additional cost, we have an LCD remote available

(1) DC input connections: Connects to the battery bank.

(2) Bonding lug: Connects to the ground system.

(3) AC Input & Output (hardwired): Terminal blocks are provided behind

front access cover for hardwiring AC Input and Output.

(4) Temp. Sense Connector Port: Connects to the temp. comp. cable

(5) Output Breaker, Branch Breaker: Trips to protect the inverter’s internal

circuitry from shorted AC loads or overload situations.

(6) AC Wiring Plate: Remove this plate to access the AC wiring terminal block

or to replace a GFCI outlet.

(7) GFCI: Provides 120VAC output. Only replace with same model GFCI.

PHYSICAL DESCRIPTION

OTHER DESIGN FEATURES

1 2 3