Product Manual

Sleep Mode/Shutdown Timer/Low Battery Settings: The setting of these
switches affects the Sleep Mode, Shutdown Timer, and Low Battery Shutdown
operation of the inverter. Turn the inverter “Off” before changing the settings of
the switches.
Switches
L C
0 0
0 0
0 1
0 1
1 0
1 0
1 1
1 1
R Inverter Operation
0
Sleep mode enabled / Shutdown timer off / Low battery 10.5V
1 Sleep mode enabled / Shutdown timer off / Low battery 11.7V
0 Sleep mode disabled / Shutdown timer off / Low battery 10.5V
1 Sleep mode disabled / Shutdown timer off / Low battery 11.7V
0 Sleep mode disabled / Shutdown timer 30 min. / Low battery 10.5V
1 Sleep mode disabled / Shutdown timer 30 min. / Low battery 11.7V
0
Sleep mode disabled / Shutdown timer 60 min. / Low battery 10.5V
1 Sleep mode disabled / Shutdown timer 60 min. / Low battery 11.7V
1. Sleep Mode:
If Sleep Mode is enabled the inverter output will automatically turn off
when AC loads greater than 15W are not present for 60 seconds. The
inverter will check for the presence of a load once a second and will
automatically restart on when it reappears. NOTE – The LED on the
GFCI will blink when the inverter has gone to sleep.
2. Shutdown Timer:
This feature is used to turn the inverter off after the set amount of time.
For example if the timer is set to 30 minutes and 30 minutes of time has
elapsed, the inverter will shut off regardless of the load. The inverter
must then be manually turned back on again when needed. When in
shutdown mode, the input DC current will not exceed 0.5mA.
3.
Low Battery Shutdown:
This
is the voltage point when the inverter will shut off due to the
battery voltage being low. The set points available are 10.5VDC &
11.7VDC.
L
C
R
SLEEP MODE / SHUTDOWN TIMER / LOW BATTERY
NOTE:
“1” = UP
“0” = DOWN
7