Product Manual

WARNING: Power Inverters produce hazardous voltages. To avoid risk of
harm or fire, the unit must be properly installed.
WARNING: There are no user serviceable parts inside. Do not remove the cover.
WARNING: Power Inverters should not be mounted in a location that
may be exposed to rain or spray.
WARNING: Power Inverters should not be installed in a zero clearance enclosure.
WARNING: Damage to the Power Inverter will occur if correct polarity
is not observed when installing the inverter’s DC input cables.
WARNING: Damage to the Power Inverter will occur if an external AC
power source is applied to the inverter’s AC hardwire output.
WARNING: Power Inverters contain a circuit breaker and capacitor that
may produce a spark upon connection or during normal operation. Do not
mount in a confined battery or gas compartment.
WARNING: Be sure the Power Inverter is turned OFF during installation.
WARNING: Be sure the Power Inverter is turned OFF and AC power is
disconnected when batteries are being connected, disconnected, serviced, and
replaced.
WARNING: Working in the vicinity of lead-acid batteries is dangerous.
There is a risk of acid exposure.
WARNING: Batteries generate explosive gases during operation.
WARNING: There is risk of high current discharge from shorting a battery
that can cause fire and explosion. Use insulated tools during installation.
WARNING: Remove all rings, watches, jewelry or other conductive items
before working near the batteries.
WARNING: Inspect the batteries at least once a year for cracks, leaks or swelling.
WARNING: Dispose of the batteries according to local regulations.
Do not incinerate batteries; risk of explosion exists.
WARNING: Be sure the Power Inverter is turned OFF and AC power is
disconnected when batteries are being connected, disconnected, serviced, and
replaced or personal injury and/or damage to the inverter could result.
Inverter Safety Instructions
Battery Safety Instructions
3