Datasheet

INPUT SPECIFICATIONS (1)
Description TDxxxx TAxxxx
Control Voltage Range 3-32 VDC 90-280 VAC
Minimum Turn-On Voltage 3.0 VDC
90 Vrms
Minimum Turn-Off Voltage 1.0 VDC
10 Vrms
Maximum Reverse Voltage -32 VDC
-
Typical Input Current 3.4 mA @ 5 VDC, 20 mA @ 28 VDC 2 mA @ 120 Vrms, 4 mA @240 Vrms
Nominal Input Impedance 1500 Ohm
60 K Ohm
Maximum Turn-On Time [msec] 1/2 Cycle 10
Maximum Turn-Off Time [msec] 1/2 Cycle 40
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms
Minimum Insulation Resistance (@ 500 V DC)
10
9
Ohm
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -40 to 80°C
Ambient Storage Temperature Range -40 to 125 °C
Weight (typical) 3.0 oz (86.5g)
Encapsulation Thermally conductive Epoxy
Terminals Screws and Saddle Clamps Furnished, Unmounted
Recommended Terminal Screw Torque Range: 6-32 Screws - 10 in lbs. 8-32 Screws - 20 in. lbs. (Screws dry without grase)
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Heat sinking required, for derating curves see page 2