Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay Three Phase GN3, 3PST-NO, 50A, 600V, Screw Terminal

PRODUCT SELECTION

50A25AControl Voltage

4-32 VDC GN325DLZ GN350DLZ

18-36 VAC GN325ELZ GN350ELZ

90-140 VAC GN325BLZ GN350BLZ

AVAILABLE OPTIONS

OUTPUT SPECIFICATIONS (1)

50A25ADescription

Operating Voltage (47-63Hz) [Vrms ] (2) 48-600 48-600

Transient Overvoltage [Vpk, t=1 min.] 1200 1200

Static off-state dv/dt (V/µsec, Ta=25°C) (3) 500 500

Maximum Load Current [Arms] (4) 25 50

Minimum Load Current [mArms] 100 100

Maximum Off-State Leakage Current [mArms] (5) 0.06 0.06

1 Cycle surge current (50Hz) 275 710

1 Cycle surge current (60Hz) 300 750

1 Second surge current (Apk. Ta=25°C) 50/60 Hz 85 150

Forward Voltage Drop (Vpk @ Imax, Ta=25°C) 1.35 1.35

I T (50Hz, 1/2 cycle)

380 2520

I T (60Hz, 1/2 cycle)

370 2320

GN3 Series

• Current ratings of 25 and 50 Amps

• Output voltage rating: 48-600 VAC

• Direct bond copper substrate

• LED input status indicator

• IP20 “touch-safe” cover

• Transient protection built-in

• UL508 endurance rating for enhanced reliability

• UL/CSA/TUV Approved, CE Compliant to EN60950-1

180-260 VAC GN325ALZ GN350ALZ

Required for valid part number

For options only and not required for valid part number

Series

Operating Voltage

A: 180-260 VAC

B: 90-140 VAC

C: 4-32 VDC

D: 18-36 VAC

Rated Load Current

25: 25 Amps

50: 50 Amps

GN3 A L Z25

Datasheet

Panel Mount

Do not forget to visit us at: www.crydom.com

Snubber Option

L: No Snubber (48-600 VAC)

S: Snubber Included (48-530 VAC)

Switching Type

R: Instantaneous Turn-on

Z: Zero voltage Turn-on

Thermal Resistance Junction to baseplate (Rjb) [°C/W] 0.24 0.12

HP Ratings at 120V / FLC [Arms] 0.75 / 6.4 1.5 / 12

HP Ratings at 240V / FLC [Arms] 1 / 4.2 3 / 9.6

HP Ratings at 480V / FLC [Arms] 3 / 4.8 7.5 / 11

HP Ratings at 600V / FLC [Arms] 5 / 6.1 10 / 11

Min/Max wire size 16/8 AWG 16/8 AWG

Screw Torque Range [in-lb/Nm] 18-20 / 2.03-2.26 18-20 / 2.03-2.26

Summary of content (6 pages)

PAGE 1
Panel Mount Datasheet GN3 Series • Current ratings of 25 and 50 Amps • Output voltage rating: 48-600 VAC • Direct bond copper substrate • LED input status indicator • IP20 “touch-safe” cover • Transient protection built-in • UL508 endurance rating for enhanced reliability • UL/CSA/TUV Approved, CE Compliant to EN60950-1 PRODUCT SELECTION Control Voltage 4-32 VDC 18-36 VAC 90-140 VAC 180-260 VAC 25A 50A GN325DLZ GN325ELZ GN325BLZ GN325ALZ GN350DLZ GN350ELZ GN350BLZ GN350ALZ AVAILABLE OPTIONS Operating
PAGE 2
Panel Mount Datasheet INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Must Turn-Off Voltage Maximum input current Minimum input current (for on-state) Input Resistance Turn-On Time [msec] (6) Turn-Off Time [msec] Min/Max wire size Screw Torque Range [in-lb/Nm] GN3xxDx GN3xxEx GN3xxBx GN3xxAx 4.0-32 VDC 4.0 VDC 1.
PAGE 3
Panel Mount Datasheet EQUIVALENT CIRCUIT BLOCK DIAGRAM LOAD L3 AC + A1 Load can be wired in either position - A2 T3 LOAD AC L2 LOAD AC Load can be wired in either position T2 LOAD AC L1 LOAD AC Load can be wired in either position LOAD T1 AC * Snubber not included in all models THERMAL DERATE INFORMATION GN325xxx GN350xxx 1.0 ºC/W 0.7 ºC/W 0.25 ºC/W 25 50 20 40 Load Current (Amps) Load Current (Amps) 0.
PAGE 4
Panel Mount Datasheet AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.
PAGE 5
Panel Mount Datasheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 6
Panel Mount Datasheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.