Datasheet

ManualsBrandsSensata Crydom ManualsAutomationSolid State Relay Timer Call & reset

DataSheet

Solid State Relay Timer

SeriesOneDR Timer

• 6 Amp AC and DC rated output

• Compact size (11mm wide)

• Dual SCR or MOSFET output

• AC/DC control

• Zero-crossing (resistive loads) or random-fire (inductive loads) AC output

• Timer status LED indicator

• UL listed, HP rated

• 8 Industry standard fuctions (A/At, B, C, D/Di, H/Ht, L/Li, Ac and Bw)

PRODUCT SELECTION

Control Voltage DC OutputAC Output

12-24 VAC/DC DRTx24D06x DRTx06D06

90-140 VAC/DC DRTx24B06x

180-280 VAC/DC DRTx24A06x

AVAILABLE OPTIONS

DRT

Series

Operating Voltage

06: 60 VDC

24: 280 VAC

Rated Load Current

06: 6 Amps

Control Voltage

D: 12-24 VAC/DC

A: 180-240 VAC/DC

B: 90-140 VAC/DC

Timing Function

A: A/At, Delay on Make

B: Single Shot

C: Delay on Break

H: H/Ht, Interval

L: L/Li, Repeat Cycle

U: Multifunction

(A/At, H/Ht, D/Di,

B, C, Ac & Bw)

Switching Type

(24 suffix only)

Blank: Zero Voltage Turn-On

R: Random Turn-On

0624 DA R

Output

Only

Required for valid part number

For options only and not required for valid part number

OUTPUT SPECIFICATIONS

(1)

DRTx06DRTx24Description

Operating Voltage 24-280 VAC (47-440Hz) 1-48 VDC

Transient Overvoltage [Vpk] 600 60 VDC

Rated Load Current

(2)

6 Arms 6 A

Rated Load Current {UL508 Motor Controller}

(2)

[Arms] 3.6 Arms -

Minimum Load Current 150 mArms 2.5 mA

Maximum Off-State Leakage Current @ Rated Voltage 0.1 mArms 0.25 mA

Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec]

(3)

500 -

Maximum Surge Current (AC output 1 cycle. DC output 10ms) 285/300 Apk (50/60Hz) 60 A

Maximum I²t for Fusing [A² sec] 410/375 (50/60Hz) -

Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.3 0.3 VDC

Maximum On-State Resistance (RDS-ON) [Ohms] - 0.034

HP rating UL 508/IEC60947[HP (KW)]: 240 VAC 1/3 (0.24) -

IEC 62314 LC-A [FLA] 6 A -

IEC 62314 LC-B [Kw] 0.24 -

Wire Size min/max (solid/stranded) [AWG/ IEC mm²]

(4)

22/12 [0.33/3.31] 22/12 [0.33/3.31]

Output Terminal Screw Torque [in lb (Nm)] 7.0 (0.8) 7.0 (0.8)

Do not forget to visit us at: www.crydom.com

Not all part number combinations are available.

Contact Crydom Technical Support for information on

the availability of a specific part number.

Summary of content (7 pages)

PAGE 1
Solid State Relay Timer DataSheet SeriesOneDR Timer • 6 Amp AC and DC rated output • Compact size (11mm wide) • Dual SCR or MOSFET output • AC/DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) AC output • Timer status LED indicator • UL listed, HP rated • 8 Industry standard fuctions (A/At, B, C, D/Di, H/Ht, L/Li, Ac and Bw) PRODUCT SELECTION Control Voltage AC Output DC Output 12-24 VAC/DC 90-140 VAC/DC 180-280 VAC/DC DRTx24D06x DRTx24B06x DRTx24A06x DRTx06D06 AVAILABLE O
PAGE 2
Solid State Relay Timer DataSheet INPUT SPECIFICATIONS (1) Description DRTxxxD06 DRTx24A06 DRTx24B06 Control Voltage Range Must Turn-Off Voltage Min Input Current @ Min Voltage (AC/DC) (for on-state) Maximum Input Current @ Maximum Voltage Nominal Input Impedance Wire Size min-max (solid/stranded) [AWG/ IEC mm²] (4) LED Status Indicator (Color) Input Terminal Screw Torque [in lb (Nm)] Maximum turn-on/off time 12-24 VAC/DC 1 VAC/DC 7.6/6.3 mA (5) 12.1/9.1 mA (6) 2K (7) 22-16 / 0.33-1.31 Yes (green) 4.
PAGE 3
Solid State Relay Timer DataSheet TIMER SETTINGS & RANGES Timing Ranges (11) Timer Settings Identification Timing Range 1s 0.1 s to 1 s 10 s 1 s to 10 s 1 min 0.1 min to 1 min 10 min 1 min to 10 min 1h 0.
PAGE 4
Solid State Relay Timer DataSheet MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] 2.87 [73.0] 0.44 [11.0] 2.02 [51.2] 3.44 [87.3] 4/A2 2/T1 DRTL06D06 3.27 [83.0] 4WB8 S OL I D S TAT E T I M E R INPUT 12-24 VDC General Use 60VDC/6Arms @40°C Ambient Temperature IND. CONT. EQ +3/A1 +1/L1 Y1 INPUT STATUS 1.76 [44.8] 2.59 [65.9] 3.45 [87.
PAGE 5
Solid State Relay Timer DataSheet LED STATUS FUNCTION LED Status by Function Function A/At Delay On Make H/Ht Interval D/Di Repeat Cycle Control Voltage Y1 Timing Output State LED Status Notes At function is identical to the A function except when Y1 is connected to A1 timing is paused. When Y1 is removed timing resumes until relay times out. To reset timer remove control power.
PAGE 6
Solid State Relay Timer DataSheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 7
Solid State Relay Timer DataSheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.