Datasheet

MECHANICAL SPECIFICATIONS
(1)
Tolerances: ±0.02 in / 0.5 mm
All dimensions are in: inches [millimeters]
(6)
6
5
4
3
2
1
100 20 30 40 50 60 70 80
0
Ambient Temperature (ºC)
Load Current (Amps)
THERMAL DERATE INFORMATION
DRC3Pxx (3 legs controlled)
Single unit
Multiple units
(6)
Ambient Temperature (ºC)
Load Current (Amps)
DRC3Pxx-2 (2 legs controlled)
Single unit
Multiple units
8
7
6
5
4
3
2
1
0 2010 30 40 50 60 70 80
0
DataSheet
Solid State Contactor
Do not forget to visit us at: www.crydom.com
Copyright © 2014 Custom Sensors & Technologies. Specifications subject to change without notice.
(6)
Ambient Temperature (ºC)
Load Current (Amps)
DRC3R
Single unit
Multiple units
8
7
6
5
4
3
2
1
0 2010 30 40 50 60 70 80
0
Top/Bottom view (Fig. 1)
Fig. 1
GENERAL NOTES
(1) All parameters at 25°C unless otherwise specified.
(2) For DRC3P relay will self trigger between 900-1200V, Not suitable for capacitive loads
(3) Mounted in the Vertical position.
(4) For input to auxiliary output the dielectric strength is 2.5KV.
(5) For low temperature operation consider nominal control voltage.
(6) Minimum spacing to obtain max. current is 22mm between adjacent units.
(7) Reverse Amber Indicator is for DRC3R models only.
(8) For DRC3R the turn-on time is 100ms ± 30ms. For DRC3P Instantaneous Turn-on, Option D, turn-on time is 4 msec.
(9) When is complete removed the control signal. For DRC3R the turn-off time is 20ms.
(10) When protected with J Class fuses rated 600 VAC, 20 A or equivalent
(11) Operating voltage range 18-30 VDC is also valid when used to latch the DRC contactor control input.
(12) Derate information is valid when DCR contactors are used with or without accessories, installed on top and/or bottom.
(13) For DRC3P models external loads can be connected in parallel to the control input.
TERMINAL SCREW TYPE
INPUT
STATUS
XXXX
IND. CONT. EQ.
DRC3
1.23
[31.19]
2.29
[58.26]
2.58
[65.53]
1.68
[42.67]
3.41
[86.71]
1.78
[45.31]
3.78
[96.02]
3.51
[89.16]
2.92
[74.17]
0.23
[5.84]
A1
A2
A3 2313
2414
(12)