Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay, 25A, 600V, Zero Voltage Switching

Page 1

www.sensata.com

DR67 SERIES | 25/30 AMPS

DIN RAIL MOUNT SOLID STATE RELAYS

Features

Introduction

• 3-Phase AC Output DIN Rail Mount SSRs

• Output ratings up to 30 Amps at 600 VAC

• 2 & 3 controlled Legs option

• Over Temperature protection w/alarm (optional)

• Built-in overvoltage protection

• IP20 touch-safe housing

• AC or DC control

• cULus listed and VDE approved

The DR67 is a compact 3-phase solid state relay in a DIN rail 67.5mm wide package with output ratings up to 30 Amps per channel @ 40°C. Its built-in

overvoltage protection and the optional overtemperature protection make it suitable for demanding heating, motion and lighting applications.

It’s easy to install and its large cage clamp terminals allow connecting wires up to 2 AWG size on the output terminals without the use of any additional

accessories, therefore reducing installation cost and time.

UL listed and VDE certified, the DR67 is a powerful and versatile solid state relay with superior performance when compared to previous generations and

competitor products.

PRODUCT SELECTION

Control Voltage

25A 30A

4-32 VDC

DR6760D25P DR6760D30P

90-280 VAC/VDC

DR6760A25P DR6760A30P

Applications

• Plastic injection molding equipment

• Packaging equipment

• Industrial ovens

• Lighting control

• Professional cooking equipment

• Pump control

• Conveyor drives

• HVAC&R

Summary of content (10 pages)

PAGE 1
DR67 SERIES | 25/30 AMPS DIN RAIL MOUNT SOLID STATE RELAYS Introduction The DR67 is a compact 3-phase solid state relay in a DIN rail 67.5mm wide package with output ratings up to 30 Amps per channel @ 40°C. Its built-in overvoltage protection and the optional overtemperature protection make it suitable for demanding heating, motion and lighting applications.
PAGE 2
Example : DR6760A25RPTA ORDERING OPTIONS Description of part number example DR67 Family 60 x xx P x xx Operating Voltage 48-600 VAC Control Voltage D = 4-32 VDC (4-28 VDC for TA option) A = 90-280 VAC/VDC Rated Load Current 25 = 25A, 3-legs 30 = 30A, 2-legs Switching Type Blank = Zero voltage turn on R = Instantaneous turn on Overvoltage Protection P = With internal overvoltage protection Over Temperature Protection(1) Required for valid part number For options only and not required for valid
PAGE 3
Input (1) Description DR6760Dxxx DR6760Axxx wo-TA Option w-TA Option 4-32 VDC (4) 4-28 VDC(4) Control Voltage Range wo-TA Option w-TA Option 90-280 VAC/VDC Maximum Reverse Voltage -32 VDC - Minimum Turn-On Voltage 4 VDC 90 VAC/VDC Must Turn-Off Voltage 1 VDC 5 VAC/VDC Minimum Input Current (for on-state) 25 mA 20 mA 1 mA 1 mA Maximum Input Current 40 mA 50 mA 4 mA 8 mA Nominal Input Impedance Current Limited Maximum Turn-On Time [msec] 1/2 Cycle Maximum Turn-Off Time [msec]
PAGE 4
EQUIVALENT CIRCUIT BLOCK DIAGRAMS/WIRING DIAGRAMS DR6760X25 DR6760X30 L1 L2 L3 48-600 VAC, 47-440 Hz L1 L2 L3 Short circuit and overload current protection /> /> /> 3/L2 1/L1 L2 L3 T1 T2 T3 5/L3 48-600VAC L1 INPUT A2 - A1+ INPUT CTRL 4-32VDC CONTROL INPUT 4/T2 2/T1 Motor Controller Application T1 T2 T1 T2 6/T3 General Use Application T3 T1 T3 T2 T3 M 3 DR6760X30 ( 2 CONTROLLED LEGS ) DR6760X25 ( 3 CONTROLLED LEGS ) MAIN CIRCUIT MAIN CIRCUIT L1 L2 L3 +A1 L1 L2 L3 +
PAGE 5
L1 L2 L3 DR6760X25TA DR6760X30TA 48-600 VAC, 47-440 Hz L1 L2 L3 Short circuit and overload current protection /> /> /> 3/L2 1/L1 L2 L3 T1 T2 T3 5/L3 48-600VAC L1 INPUT Motor Controller Application T1 T2 A3 CONTROL INPUT A4 A2 - A1+ ALARM OUTPUT A2 INPUT CTRL 4-32VDC A1 4/T2 2/T1 T1 T2 6/T3 General Use Application T3 T1 T3 T2 T3 M 3 DR6760X25TA (3 CONTROLLED LEGS ) DR6760X30TA (2 CONTROLLED LEGS ) ALARM OUTPUT MAIN CIRCUIT ALARM OUTPUT MAIN CIRCUIT L1 L2 L3 +A
PAGE 6
MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in inches [mm] 3X Ø .17 4.4 MOUNTING HOLE 2.66 67.5 1.11 28.2 4X .87 22.2 3/L2 1/L1 T2 T3 48-600VAC T1 5/L3 4.04 102.6 INPUT INPUT CTRL 4-32VDC 2.93 74.5 L3 A2 - 3.61 91.8 L2 A1+ 4.39 111.5 L1 4/T2 2/T1 6/T3 1.96 49.7 5.82 147.8 1.45 36.8 5.12 130.1 2.31 58.6 Page 6 Copyright © 2019 Sensata Technologies, Inc. www.sensata.
PAGE 7
SURGE CURRENT INFORMATION(8) 25A & 30A THERMAL DERATE INFORMATION STATUS CHART (only for models with overtemperature protection) TA SUFFIX MODELS Conditions 1,11 Description Initial Condition. Control Input is On, Output is activated, 2, 4 temperature rises, Green LED is On. 3, 7 Control Input is Off, Output is Off. 5 LED changes to solid Orange color. Output is Off due to overtemperature, 6, 9 Alarm is latched On, LED changes to solid red.
PAGE 8
INSTALLATION INSTRUCTIONS Mounting on DIN Rail • Locate rail and align with non moveable end of DR67 DIN clip. • Using reasonable force, push DR67 in the direction of the arrow (as shown in fig.1). • For removal pull release tag by moving blade of screwdriver in direction of arrow and pull it away from DIN rail. Mounting on Panel • Locate the panel section on which the DR67 SSR will be mounted on (as shown in fig.2) • DIN clip includes tabs for this type of mounting. Tab holes have a diameter of 4.5 mm.
PAGE 9
AGENCY APPROVALS & CERTIFICATIONS Approvals (Tested and Certified According To) E116949 40047491 UL 508 and C22.2 No. 14 EN 62314 CONFORMANCES ENVIRONMENTAL Vibration Resistance IEC 60068-2-6 (9)(10) Shock Resistance IEC IEC 60068-2-27 (9)(10) Resistances to heat and fire Amplitude Range: 10-55 Hz, Displacement 0.75mm Peak Acceleration: 15g, Duration 11ms.
PAGE 10
WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE • The product’s side panels may be hot, allow the product to cool before touching • Follow proper mounting instructions including torque values • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage.