Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay CL, SPST-NO, 10A, 280V, Screw Terminal

DataSheet

Panel Mount

CL Series

• Ratings from 5A and 10A @ 24-280 VAC

• Triac Output

• LED Status Indicator

• UL Approved, CE Compliant to EN60950-1

• Improved SEMS screw and washer

• Redesigned housing with anti-rotation barriers

For Generation 3 datasheet click here

• AC or DC control

• EMC Compliant to Level 3

• Epoxy Free Design

PRODUCT SELECTION

Control Voltage 5A

3-32 VDC CL240D05

90-250 VAC CL240A05

10A

CL240D10

CL240A10

AVAILABLE OPTIONS

Not all part number conbinations are available.

Contact Crydom Technical Support for information on

the availability of a specific part number.

Required for valid part number

For options only and not required for valid part number

Series

Load Voltage

240: 24-280 VAC

Control Voltage

A: 90-250 VAC

D: 3-32 VDC

Switching Type

Blank: Zero Voltage

Turn-On

R: Instantaneous Turn-On

Rated Load Current

05: 5 Amps

10: 10 Amps

Cover

Blank: Not Included (IP00)

C: Included (IP20)

Thermal Pad

Blank: Not Included

H: Included

CL A 10 R C240 H

Termination

Blank: Screws & clamps

K: Installed standoffs with

screws for PC Board

mounting (IP00 only)

OUTPUT SPECIFICATIONS

(1)

Description 5A

Operating Voltage (47-63Hz) [Vrms] 24-280

Transient Overvoltage [Vpk]

(2) 600

Maximum Off-State Leakage Current @ Rated Voltage [mArms] 7

Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500

Maximum Load Current [Arms]

(3) 5

Minimum Load Current [mArms] 150

Maximum 1 Cycle Surge Current (50/60Hz)[Apk] 84/100

Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6

Thermal Resistance Junction to Case (Rjc) [°C/W] 2.3

Maximum 1/2 Cycle I² t for Fusing (50/60Hz)[A²sec] 35/42

Minimum Power Factor (with Maximum Load) 0.5

10A

24-280

600

500

150

120/126

1.5

2.3

72/66

0.5

Minimum Heat Sink for Rated Current @ 40°C [°C/W] 3 1.5

INPUT SPECIFICATIONS

(1)

Description AC Control

Control Voltage Range 90-250 VAC

Maximum Reverse Voltage -

Minimum Turn-On Voltage 90 VAC

Minimum Turn-Off Voltage 10 VAC

Minimum Input Current (for on-state) 6 mA

Maximum Input Current 10 mA

Nominal Input Impedance Current Limited

Maximum Turn-On Time [msec] 20

Maximum Turn-Off Time [msec] 30

DC Control

3-32 VDC (4)

-32 VDC

3 VDC

1 VDC

10 mA

14 mA

Current Limited

1/2 Cycle

(5)

1/2 Cycle

Do not forget to visit us at: www.crydom.com

Summary of content (7 pages)

PAGE 1
Panel Mount DataSheet CL Series • Ratings from 5A and 10A @ 24-280 VAC • Triac Output • LED Status Indicator • UL Approved, CE Compliant to EN60950-1 • Improved SEMS screw and washer • Redesigned housing with anti-rotation barriers • AC or DC control • EMC Compliant to Level 3 • Epoxy Free Design For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 3-32 VDC 90-250 VAC 5A 10A CL240D05 CL240A05 CL240D10 CL240A10 AVAILABLE OPTIONS Control Voltage A: 90-250 VAC D: 3-32 VDC Series C
PAGE 2
Panel Mount DataSheet GENERAL SPECIFICATIONS (1) Description Parameters Dielectric Strength, Input to Output (50/60Hz) Dielectric Strength, Input/Output to Ground (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range (6) Ambient Storage Temperature Range Weight (typical) Housing Material Baseplate Material Input Terminal Screw Torque Range (in-lbs/Nm) Load Terminal Screw Torque Range (in-lbs/Nm) SSR Mounting Screw Torque Range (in-lbs/Nm)
PAGE 3
Panel Mount DataSheet MECHANICAL SPECIFICATIONS (1) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Screw Termination 1.1 [27.9] 0.49 [12.4] 1 1.88 [47.6] OUTPUT INPUT 1.1 [27.9] 0.49 [12.4] 0.89 [22.6] Mounting Hole/Slot 0.19 [4.9] DIA. 2 1 2.25 [57.3] 1.7 [43.2] S O L I D S TAT E R E L AY 4 Hex Standoff Termination (“K” Option) (7) 1.88 [47.6] OUTPUT INPUT 1.0 [25.4] 1.0 [25.4] 1.75 [44.5] 1.75 [44.5] 1.88 [47.6] 1.7 [43.2] 3 Mounting Hole/Slot 0.19 [4.
PAGE 4
Panel Mount DataSheet SURGE CURRENT INFORMATION Single Pulse (10) CL240x10 90 Surge Current (Amp) AC Peak Surge Current (Amp) AC Peak CL240x05 80 70 60 50 40 30 20 10 0 0.01 0.1 1 120 100 80 60 40 20 0 10 0.01 0.1 1 10 Surge Duration (sec) Surge Duration (sec) THERMAL DERATE INFORMATION (i) SSR metal base plate acting as heat sink, it must be exposed to free ambient air. CL240x05 2°C/W 3°C/W CL240x10 1.
PAGE 5
Panel Mount DataSheet AGENCY APPROVALS EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: IEC 61000-4-2 Electrostatic Discharge Level 3 IEC 61000-4-4 Electrically Fast Transients Level 3 IEC 61000-4-5 Electrical Surges Level 3 E46203 CL Series has Environmental Product declarations type III conforming to ISO 14025.
PAGE 6
Panel Mount DataSheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 7
Panel Mount DataSheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.