Product guide

ManualsBrandsSensaphone ManualsComputer equipmentWSG30

Application Guide

14 WWW.SENSAPHONE.COM

WWW.SENSAPHONE.COM

This Cold

Storage Starter Solution

uses the Sensaphone

Web600 to monitor and

notify. The WEB600 provides a web-based

interface that includes time stamped data

logging. Up to 100,000 data samples can

be stored internally that can be viewed

live or downloaded into a spreadsheet.

And whenever temperatures are not

within the speciﬁ ed range, the WEB600

will immediately transmit up to 32 alarm

notiﬁ cations as e-mail messages or text

messages.

FGD-W600 . . . . . . . . . . . . . . . . . . . pg

WEB600 Battery Backup

Provides uninterrupted power to

the WEB600 for approximately

two hours in the event of a power loss. The

WEB600 can be conﬁ gured to monitor the

battery backup and send an alarm when the

battery becomes low.

FGD-W610–B . . . . . . . . . . . . . . . . . pg

2.8K Temperature Sensor with

Glass Bead Vial

The glass bead ﬁ lled vial provides a

buffer from any momentary ﬂ uctuations

that may cause a preliminary alarm

dial out such as defrost cycles, opening

of doors and fans circulating air.

FGD-0107 . . . . . . . . . . . . . . . . . . . pg

What’s Important

In Your COLD

STORAGE facility?

· Temperature Range

· Data Logging & Trending

· Power Failure

· Condensation & Leaks

Whether you are storing frozen

foods, medical tissue samples,

or critical vaccines, Sensaphone

has a solution to help you verify

that everything is stored at the

correct temperature. Products are

available to monitor standard

freezer temperatures and

even –80°C ultra low freezer

temperatures. Early warning

detection can also be performed

by watching other critical

conditions, like power failure,

equipment failure, leaks, and

more. Upgraded Sensaphone

solutions can also perform

detailed temperature data

logging and trending in addition

to instant alarm notiﬁ cation.

Cold Storage

Sensaphone 400

The Sensaphone Model 400 is a good alternative

to the Web600 when you have a phone line

available, but not a computer network connection.

The 400 can monitor up to four temperatures or

other sensors, and notify up to four people. The

alarm notiﬁ cations are in the form of voice phone

calls with customized voice messages.

FGD-0400 . . . . . . . . . . . . . . . . . . . pg

Sensaphone 2800

When you can’t get wires to your sensors, the

Model 2800 is the best choice. The Sensaphone

2800 can monitor up to four hard wired sensors

and four wireless sensors. A variety of wireless

sensors are available including ultra low

temperature measurement.

FGD-2800-CD . . . . . . . . . . . . . . . . . . pg

WEB600

Starter

Solution

Ultra–Low Temp Sensor

Designed to monitor temperatures from

-122° to 53°F inside refrigerators and

freezers.

IMS-4814 . . . . . . . . . . . . . . . . . . . . pg

Wireless Temp Sensor

The Wireless Temperature Sensor

includes a built in radio transmitter and

temperature element for monitoring

temperatures from -109° to 115°F.

WSR-0100 . . . . . . . . . . . . . . . . . . . pg

2.8K Temperature Probe

This sensor makes monitoring temperatures

at a location away from a Sensaphone unit.

Monitors temperatures from -109° to 115°F.

FGD-0101 . . . . . . . . . . . . . . pg

Recommended General Accessories

IMS-1000

The IMS-1000 is similar to the Web600 in that it is a web-based monitoring solution, but it goes a little

bit further. Instead of monitoring up to six sensors, it can monitor eight. The IMS-1000 also has the

option of a phone line connection in addition to the Ethernet computer network connection. So, even if

your computer network is not working, the IMS-1000 can still use a standard phone line to notify of a

problem.

IMS-1001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg

IMS-1002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg

IMS-4000

For a wide area enterprise solution, we recommend the IMS-4000. It is similar to the IMS-1000 with both

the Ethernet connection and a phone line connection, but designed for monitoring multiple locations. The

IMS-4000 system is made up of one Host and up to 31 Nodes that can be spread out over a large area.

Each Host or Node can monitor up to eight sensors, and the group of Hosts and Nodes can be managed

from one common interface. The Nodes can be in a different room as the Host, or a different building,

or even a different country. The IMS-4000 provides a very modular and expandable remote monitoring

solution.

IMS-4001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg

Recommended IMS Accessories

Recommended Wireless Accessories

WEB600 Battery Backup

Provides uninterrupted power to

the WEB600 for approximately

two hours in the event of a power loss. The

Cold Food Storage

Vaccine Storage

Cold Medical Storage