Product guide

Application Guide
Application Guide
10 WWW.SENSAPHONE.COM
WWW.SENSAPHONE.COM
11
What’s Important
In Your MUNICIPAL
WATER facility?
· Tank Levels · Flow Rates
· Pump Status · Turbidity
· Power Failure · Security
· Equipment Failure
Sensaphone provides a wide variety of
solutions available for remote Water
and Wastewater facilities. Products are
available to perform anything from simple
monitoring and alarm notifi cation, up to
data logging, control and sophisticated
SCADA functionality. Whatever level of
remote monitoring and control you need,
Sensaphone has a solution to keep you
informed and in control 24/7.
Express II
If more than four sensor inputs
are required, the Sensaphone
Express II provides eight inputs to
start, and the ability to expand
in groups of eight up to 40. In
addition to the input expansion, the Express II
has a local LCD for easy access to status and
programming. Up to 48 people can be notifi ed for
alarms using custom voice phone calls.
FGD-6700 . . . . . . . . . . . . . . . . . . . pg
Sensaphone 3000
The SCADA 3000 is a great
choice for multiple remote sites
being viewed through one central
computer. It provides data logging
and modular expansion on both
inputs and outputs. High level decision making
can be performed on the SCADA 3000 through
Ladder Logic, or even structured C programming.
It is capable of simple pump control, or almost any
complex calculations and control decisions.
FGD-3000 . . . . . . . . . . . . . . . . . . . pg
Most
basic alarm dialer
needs can be met
with the Sensaphone
Model 1400. It has
four universal inputs
that can monitor from
any dry contact status
device, or any 4-20mA
analog transducer.
When using analog devices,
the Model 1400 can even scale the input
range so you will be measuring each
condition in real engineering units. The
sealed Nema-4X enclosure is well suited for
outdoor environments. Alarm notifi cation
is performed with phone calls using custom
voice messages.
FGD-1400 . . . . . . . . . . . . . . . . . . . pg
Sensaphone 1400
CELL682
When your remote water treatment site does not already
have a phone line, the CELL682 can provide wireless
access to the site for both alarm monitoring and pump
control. The wireless service is less expensive than a
phone line, plus the CELL682 provides the convenience
of webpage access for all status and programming. It
has monitoring for six 4-20mA analog transducers, eight
contact sensors, and two relay outputs. The two relays
can be used for remote manual control, or even automatic duplex
pump control.
FGD-CELL682-CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg
SAT4D
If you need to monitor equipment in a location that
is very remote, or where there are limited or no
communication options, then the SAT4D is perfect.
It communicates via satellite and can be used
anywhere in the US with 100% coverage. Up
to four conditions can be monitored and alarm
notifi cation is delivered by voice phone calls or
e-mails. The SAT4D runs without power and can operate for over fi ve years
on its internal battery.
FGD-SAT4D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg
Water Treatment
Pressure
Flow Rate
Tank Level
Tank Level
Power Failure
Leak Detection
Power Failure
Power Failure
Turbidity
Other Sensaphone Solutions
Starter
Solution
38
Application Guide
28
34
20
42