Product guide

IMS Wireless
Node & Sensors
IMS Sensors
& Accessories
82 WWW.SENSAPHONE.COM
WWW.SENSAPHONE.COM
83
IMS Accessories
SENSAPHONE
Monitoring Sensor
Specifications
Description
Package Contents
Specifications
Description
Package Contents
S
O
L
U
T
I
O
N
I
M
S
W
I
R
E
L
E
S
S
IMS Wireless Zone Water Detection Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4216
(1) Wireless zone water detector
(1) 10’ WaterRope
(5) Adhesive cable clamps
(3) AA alkaline batteries
(1) Wall mounting kit
Operating Temperature
Range:
32° to 122°F (0° to 50°C)
Operating Humidity:
5-90% RH
Power Requirements:
(3) AA Batteries / 5VDC
Power Supply (Router Mode)
Wireless Technology:
ISM 2.4GHz, 100mW
(20dBm)
Housing:
White plastic
Size:
6.8” x 3.5” x 1.5”
17cm x 9cm x 4cm
Compatibility:
IMS-4000 Wireless Node
*Specifications subject to change
without notice
The IMS-4216 Wireless Zone Water Detection Sensor provides remote leak detection monitoring without
running wires. The sensor comes with 10’ of leak detection cable which can be installed around equipment
or under a raised flooring system. The detection cable can be extended to cover larger areas by connecting
additional 10’ lengths. The device can transmit its signal up to 250’ indoors and even greater distances when
it has line-of-site.
Wireless Zone Water Detection Sensor
IMS Wireless Spot Water Detection Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4215
(1) Wireless spot water sensor
(1) Wall mounting kit
(3) AA alkaline batteries
Operating Temperature
Range:
32° to 122°F (0° to 50°C)
Operating Humidity Range:
5–90% RH
Power Requirements:
(3) AA Batteries
Wireless Technology:
ISM 2.4GHz, 100 mW
(20dBm)
Housing:
White plastic
Size:
6.8” x 3.5” x 1.5”
17cm x 9cm x 4cm
Compatibility:
IMS-4000 Wireless Node
*Specifications subject to change
without notice
The IMS-4215 Wireless Spot Water Detection Sensor provides remote leak detection monitoring without
running wires. The sensor has four probes on the bottom of the enclosure which will trigger an alarm when
any adjacent pair get wet. Alarm information is sent from the sensor to the IMS-4200 Wireless node via an
integrated 2.4GHz Wireless radio. The device can transmit its signal up to 250’ indoors and even greater
distances when it has line-of-site. Simply place the sensor on the floor in the area to be monitored. The sensor
comes with 3 AA alkaline batteries which will power the sensor for up to 2 years.
Wireless Spot Water Detection Sensor
IMS Accessories
Miscellaneous IMS Accessories
SENSAPHONE
Monitoring Accessories
Cat5 Cable
A current industry standard for network and telephone wiring. Standard Cat5 cable can be
used to connect any Sensaphone IMS sensor to its Host or Node.
7’ Cat5 Cable ............................................... IMS-4402
14’ Cat5 Cable .............................................. IMS-4403
25’ Cat5 Cable .............................................. IMS-4404
RJ 45 Couplers
Four female to female plug ins allows cabling to be lengthened without compromising
signal integrity.
RJ45 Couplers ............................................... IMS-4405
Wall Brackets
The Wall bracket allows the IMS-4000 Host or Node to be mounted to any wall. Comes
with (4) plastic drywall anchors and (4) #6 metal tapping screws.
Wall Bracket ................................................. IMS-4406
USB to RS232 Serial Converter
Configure network settings in the IMS-4000 Host and Node or interface a PowerGate or
Dual Relay Output Module via USB.
Serial Converter ..............................................FGD-0221