Product guide

IMS Monitoring
Solutions
IMS Monitoring
Solutions
66 WWW.SENSAPHONE.COM
WWW.SENSAPHONE.COM
67
IMS Accessories
SENSAPHONE
Monitoring Sensor
SENSAPHONE
Monitoring Accessory
IMS Outlet Switching
Description
The IMS-4000 PowerGate allows you to manually or automatically switch up to 8 electrical outlets from
the IMS-4000 ConsoleView Software or the IMS-4000 web page. This gives you the ability to remotely
turn-on, turn-off, or cycle power (reboot) remote equipment. You can also program the system to
automatically control the power to a device based on an alarm condition. The PowerGate has eight LEDs
on the front panel to indicate outlet status and a 15 Amp circuit breaker for safety. It can switch a total
of up to 12 amps of current at 120VAC 60Hz (all outlets combined). The unit is made for rack mounting
and fits in a 1 EIA rack space (17”w x 10”d x 1.75”h).
Description Part Number
IMS-4000 PowerGate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4301
IMS-4000 PowerGate2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4302
IMS-4000 PowerGate
IMS-4000 PowerGate2
Description
The IMS-4000 PowerGate2 allows you to manually or automatically switch up to 8 electrical outlets
from the IMS-4000 ConsoleView Software or the IMS-4000 web page. This gives you the ability to
remotely turn-on, turn-off, or cycle power (reboot) remote equipment. You can also program the system
to automatically control the power to a device based on an alarm condition. The PowerGate2 features
individual power input circuits for each outlet thus giving you the ability to distribute the power load
across multiple circuits. Two of the outlets can switch up to 10 amps (120VAC 60Hz) and the other six
can switch up to 4 Amps (120VAC 60Hz). The unit is made for rack mounting with steel brackets and
fits in a 1 EIA rack space (17”w x 12”d x 1.75”h).
IMS Accessories
SENSAPHONE
Monitoring Accessory
Package Contents
(1) Dual Relay Output Module
(1) 12VDC Power Supply
(1) Instruction Manual
(1) Serial Cable
Dual Relay Output Module . . . . . . . . . . . . . . . . . . . . . . . . . . .IMS-4310
Dual Relay Output Module
Temperature:
32° to 122°F
Humidity:
5–90% RH
Number of Outputs:
2
Output Type:
Dry Contact or 12V Switched
Output Rating (12V DC
Mode):
1.5 Amps total (both outputs
combined)
Output Rating (Dry Contact
Mode):
2 Amps @ 30VAC/VDC, max
Power Supply:
12VDC 2A Power Adapter.
Dimensions:
5.5” x 3.75”w x 1.5”h
Housing:
Black plastic
Compatibility:
IMS-4000, IMS-4000 Node,
*Specifications subject to change without notice
Description
The IMS-4310 Dual Relay Output Module allows you to control
two devices from any IMS-4000 Host or Node. Each output may be
controlled either manually or automatically. Each output has the option
of providing either a dry relay contact or 12VDC power. Two switches
located inside the device select the output type.
Specifications