Product guide

Accessories
& Sensors
Accessories
& Sensors
56 WWW.SENSAPHONE.COM
WWW.SENSAPHONE.COM
57
General Accessories
SENSAPHONE
Monitoring Sensor
Description
Package Contents
Specifications
Description
Float Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0222
(1) Float switch
Operating Temperature
Range:
-10° to 80°F (-23° to 26°C)
Contact Rating:
50W
Max Switch Volt:
100VDC
Housing:
Black plastic
Compatibility:
All Sensaphone products
*Specifications subject to change
without notice
The FGD-0222 float switch is a plastic side mounted float switch that is cost effective for
level control applications in small tanks where it is more convenient to install a level switch
through the sidewall of the tank. This style float switch can be rotated for Normally Open or
Normally Closed operation. Combine two switches at different levels for high and low level or
pump control or alarming.
Float Switch
USB to Serial Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0221
• Configure your Sensaphone through serial communication using newer PCs not equipped with
a serial port.
• Provides an additional serial port for situations where all existing serial ports are in use.
• Plug & Play operation through USB interface.
• Compatible with Windows 98/ME/2K/XP/Vista.
• Indicator LEDs for Power, Receive, and Transmit operations.
USB to DB–9 RS–232 Serial Converter
General Accessories
SENSAPHONE
Monitoring Sensor
Specifications
Description
Package Contents
Specifications
Description
Package Contents
Bluetooth Cell Phone Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0230
(1) Bluetooth cell phone interface
(1) Power supply
(1) 3’ telephone wire
(1) Operating instructions
Bluetooth:
Bluetooth® v2.0
Hands–free profile
Frequency 2.4GHz
Operating Temperature:
32° to 104°F
0° to 40°C
Physical Size:
4.5” x 1.8” x 4.4”
114mm x 46mm x 112mm
Compatibility:
400, 800, 1400, 1800, 2800,
and Express II
*Specifications subject to change
without notice
The XLink allows your Sensaphone to dial and receive calls using any cell phone with
Bluetooth technology. By using the XLink you can provide telephone service to your
Sensaphone by locating a cell phone next to the device. The XLink will send all incoming
calls to the Sensaphone and when the Sensaphone needs to dial out the call will be seamlessly
completed through the cell phone. The XLink is a wireless (Bluetooth) link between your
Sensaphone and a cellular phone. Perfect for access where a land line simply isn’t available.
Bluetooth Cell Phone Interface
(1) Moxa NPort 5110
(1) Installation guide
(1) Software CD
(1) 12V power supply
(4) Rubber stick on feet
Serial–to–Ethernet Device Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0300
Operating Temp Range:
32° to 131°F (0° to 55°C)
Humidity:
5–95% RH
Warranty:
5 year
Ethernet:
10/100 Mbps, RJ45
Dimensions:
1.97” x 3.15” x .87”
50mm x 80mm x 22mm
Utilities:
NPort Administrator for
Windows 95/98/ME/
NT/2000/XP/2003/Vista
OS Driver Support:
Windows 95/98/ME/
NT/2000/XP/2003/Vista/
Win7
*Specifications subject to change
without notice
The Serial-to-Ethernet Device Server allows you to access your Sensaphone 2000 or SCADA
3000 anywhere on a local LAN or the Internet. Simply connect the device to the serial port on
your Sensaphone and connect the Ethernet jack to your network. The software included with
the device server will route your computer’s serial port to the network-connected device server,
thus establishing a fast, direct connection to your Sensaphone.
Serial–to–Ethernet Device Server
Specifications
Specifications