Product guide

Accessories
& Sensors
Accessories
& Sensors
48 WWW.SENSAPHONE.COM
WWW.SENSAPHONE.COM
49
General Accessories
SENSAPHONE
Monitoring Sensor
Specifications
Description
Package Contents
Specifications
Description
Package Contents
(1) Humidity sensor
(1) Wall mounting kit
(1) Operating instructions
Humidity Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0052
Operating Temperature:
-10° to 160°F (-23° to 71°C)
Operating RH:
0 to 100% RH
Accuracy:
± 3% from 20% to 95%
Dimensions:
2.75” x 4.5” x 1.125”
70mm x 114mm x 29mm
Compatibility:
1400, 1800, 2800, 2000,
Express II, SCADA 3000,
WEB600 and CELL682.
*Specifications subject to change
without notice
Humidity Transmitter (4-20mA)
A space mount, low profile humidity transducer. Transmits actual humidity levels to the
Sensaphone for programmable high and low alarm limits. The device can be used with any
Sensaphone that supports 4-20mA inputs. The 24V DC power supply (FGD-0053) is required
unless the transmitter is used with the SCADA 3000 or Express II.
(1) Humidistat
(1) Wall mounting kit
(1) Installation instructions
Operating Temperature
Range:
32° to 95°F (0° to 35°C)
Humidity:
10 to 60% RH
Housing:
Beige plastic
Compatibility:
All Sensaphone models
*Specifications subject to change
without notice
The Humidistat can be used with all Sensaphone models to detect a high or low humidity level.
The device will cause your Sensaphone to activate an alarm when the humidity level reaches
a set threshold. Made from high impact plastic with a brushed gold-tone dial plate and a beige
cover. A nylon sensing element provides long life and accurate humidity control. With a range
of 10% to 60% RH level, the sensor causes an alarm when the humidity exceeds or falls below
the set limit. Multiple sensors may be wired to a single input.
Humidistat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0027
Humidistat
General Accessories
SENSAPHONE
Monitoring Sensor
Description
Package Contents
Specifications
Description
Package Contents
Specifications
PowerOut Alert Model PS-110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0054
(1) PowerOut Alert Model PS-110
(1) Installation instructions
Dimensions:
2.25” x 3” x 2”
57mm x 76mm x 50mm
Weight:
9.3 oz (.26 kg)
Application:
Any standard 2-3 blade 110
volt outlet
Operating Temperature:
40° to 100°F (4° to 37°C)
Contact Ratings:
.5 Amp @ 30V
Time Delay:
3 to 8 minutes
Compatibility:
All Sensaphone models
*Specifications subject to change
without notice
A compact power outage monitoring device to detect power failures. Easily plugs into any 110
VAC receptacle outlet for operation. Works with all Sensaphone products. Comes with 15 feet
of wire.
PowerOut Alert Model PS-110
24V Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0053
24V Power Supply with Battery Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0070
(4) AA Rechargeable batteries
Size:
7.5” x 3.625”
190mm x 92mm
Weight:
4.9oz (.14 kg)
Battery Backup Duration:
Up to 8 hours
Power:
24V/40mA will power two devices.
*Specifications subject to change without notice
4-20mA transducers require power to operate. Some of our Sensaphone products, like the
SCADA 3000 and Express II, provide 24 VDC power specifically for this purpose. When
using a 4-20mA transducer with any other Sensaphone product, an external power supply will
be required. Two versions are available, one providing standard 24 VDC power, and another
that also provides battery backup in case of a power outage. These can be used with any of the
Sensaphone 4-20mA transducers, FGD-0052, FGD-0068, FGD-0065, and FGD-0066, as well as
any third party 4-20mA transducer.
24V Power Supply for 4-20mA Sensors