Product guide

Accessories
& Sensors
Accessories
& Sensors
44 WWW.SENSAPHONE.COM
WWW.SENSAPHONE.COM
45
General Accessories
SENSAPHONE
Monitoring Sensor
Specifications
Description
Package Contents
Specifications
Description
Package Contents
(1) Temperature sensor
(1) 12’ wire
(1) Installation instructions
(1) Mounting Hardware
2.8K Remote Weatherproof Temperature Sensor . . . . . . . . . . . . . . . . . . . . . . . .FGD-0101
2.8K Remote Weatherproof Temperature Sensor w/ NIST Certification . . . . . . . . .FGD-0101–NIST
Accuracy:
+/- 1°F
Compatibility:
400, 800, 1400, 1800, 2800,
2000, WEB600, Express II,
and CELL682
Temp Range:
400, 800:
-20° to 150°F (-30° to 65°C)
1400, 1800, 2800, WEB600:
-109° to 115°F (-85° to 57°C)
2000:
-125° to 124°F (-87° to 51°C)
Express II:
-85° to 200°F (-65° to 93°C)
CELL682:
-100° to 124°F (-80° to 55°C)
*Specifications subject to change
without notice
The 2.8K Weatherproof Remote Temperature sensor enables monitoring temperatures at a
location away from a Sensaphone unit. It will measure and report the exact temperature back
to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger
an alarm when conditions exceed the set high or low temperature limits. It is suitable for use in
wet, dirty environments. Available with NIST temperature certification.
2.8K Weatherproof Temperature Sensor
2.8K Temperature Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0100
(1) Temperature sensor
(1) Mounting hardware
(1) Installation instructions
Accuracy:
+/- 1°F
Dimensions:
2.5” x .75” x .75”
35mm x 19mm x 19mm
Compatibility:
400, 800, 1400, 1800, 2800,
2000, WEB600, Express II
and CELL682.
Temp Range:
400, 800:
-20° to 150°F (-30° to 65°C)
1400, 1800, 2800, WEB600:
-40° to 115°F (-40° to 57°C)
2000:
-40° to 124°F (-40° to 51°C)
Express II:
-40° to 150°F (-40° to 65°C)
*Specifications subject to change
without notice
The 2.8K Remote Temperature sensor enables monitoring temperatures at a location away from
a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone
unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when
conditions exceed the set high or low temperature limits. It may be mounted anywhere air
temperatures need to be measured, however this model is recommended to be located in clean,
dry environment. For outdoor use model FGD-0101 is recommended.
2.8K Temperature Sensor
General Accessories
SENSAPHONE
Monitoring Sensor
Specifications
Description
Package Contents
Specifications
Description
Package Contents
10K Remote Weatherproof Temperature Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0102
(1) Temperature sensor
(1) 12’ wire
(1) Installation instructions
(1) Mounting Hardware
Accuracy:
+/- 1°F
Compatibility:
1400, 1800, 2800, 2000,
WEB600, Express II, and
CELL682
Temp Range:
1400, 1800, 2800, WEB600:
-87° to 168°F (-66° to 76°C)
2000:
-90° to 200°F (-68° to 93°C)
Express II:
-80° to 200°F (-62° to 93°C)
SCADA 3000:
-35° to 205°F (-37° to 97°C)
CELL682:
-60° to 175°F (-51° to 79°C)
*Specifications subject to change
without notice
The 10K Weatherproof Remote Temperature sensor enables monitoring temperatures at
a location away from a Sensaphone unit. It will measure and report the exact temperature
back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to
trigger an alarm when conditions exceed the set high or low temperature limits. It may be
mounted anywhere air temperatures need to be measured and is suitable for use in wet, dirty
environments.
10K Remote Weatherproof Temperature Sensor
2.8K Temperature Sensor with Glass Bead Vial . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0107
2.8K Temperature Sensor with Glass Bead Vial w/NIST Certification . . . . . . . . . . FGD-0107-NIST
(1) Temperature sensor with glass
bead vial
(1) 12’ wire
(1) Installation instructions
Accuracy:
±1°C (±1.8°F)
Compatibility:
1400, 1800, 2800, 2000,
Express II, WEB600 and
CELL682.
Temp Range:
400, 800:
-20° to 150°F (-30° to 65°C)
1400, 1800, 2800, WEB600:
-109° to 115°F (-85° to 57°C)
2000:
-125° to 124°F (-87° to 51°C)
Express II:
-85° to 200°F (-65° to 93°C)
CELL682:
-100° to 124°F (-80° to 55°C)
*Specifications subject to change
without notice
The FGD-0107 is ideal for cold storage temperature monitoring. The glass bead filled vial will
buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost
cycles, opening of doors, and fans circulating air. The glass beads will slow the response time of
the sensor allowing normal daily operations to occur without having an alarm initiated. This is a
highly recommended sensor for every cold storage application.
2.8K Temperature Sensor with Glass Bead Vial
Specifications