Product guide

Sensaphone
Monitoring Systems
Sensaphone
Monitoring Systems
36 WWW.SENSAPHONE.COM
WWW.SENSAPHONE.COM
37
SENSAPHONE
Monitoring Solution
Phone Notifi cation with Data
Logging for Multiple Sites
SENSAPHONE 2000 Features
Description
The 2000 is a powerful monitoring, alarm, and data logging system. It can monitor equipment and
environmental conditions using 8 universal inputs, plus built-in power failure detection. The Sensaphone
2000 also features a programmable output and a wide variety of communication options: user recordable
voice, fax, modem, numeric pager, alphanumeric pager, and internet e-mail. In addition, you can generate
a web page based on the
information in your 2000 and
post it on the internet at a
programmable time interval.
The unit will monitor and alarm
on (8) universal inputs including:
N.O./N.C. contact, 2.8K & 10K
thermistor, 4–20mA, 0–5V, run
time accumulator, and pulse count.
The unit will also monitor AC
power and battery condition. The
2000 also includes a relay output
which may be controlled manually
through the software, remotely
via touch-tone telephone, or
automatically using programmable
high and low set points.
Description Part Number
Sensaphone 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-2000
Sensaphone 2000 w/ International Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-2000-INT
Pager/Text Messages
Voice Phone Calls
Voice Call In
Fax
Public
Phone
Network
8 Universal Inputs
1 Output
RS–232
Local PC
Optional
Ethernet
Adapter
Networked PC
Ethernet
Phone Line
ModemRemote PC
Datalogger
Dialing Parameters:
• Programmable call list for each
input
• Alarm acknowledgment:
• Touch tones, callback, or modem
• Call progress monitoring:
Detect dial tone, busy signals &
ringback
• Programmable time between
calls:
30 seconds to 60 minutes
Alarm Notification:
• 32 destinations
• 36-digit telephone numbers
• 64 character e-mail addresses
Inputs:
• 8 Universal Inputs & 1 AC
Power:
• Normally Open / Normally closed
dry contact
• 2.8K / 10K thermistor
• 4-20mA current loop or 0-5V
analog voltage
• 10 bit resolution
Communication Types:
• Voice, fax, modem, e-mail,
numeric pager, alphanumeric
pager, web page
Speech Technology:
• User-recordable voice for eight
input alarm messages and one ID
message
Built-in Data Modem:
• Data throughput 14,400 bps
• 14,400 bps Fax
• Protocols: V.32bis, V.32,
V.22bis, V.22A/B, V.23, V.21,
Bell 212A & 103
Data Logging:
• Up to 32,000 samples (all
samples include date and time)
• 1 second to 200 hour sampling
rate
• User programmable
channel selection—inputs 1-8
• AC power & battery backup
Power Requirements:
• 120VAC Standard, 220VAC
optional
• Built in 10 hour battery backup
Communication Ports:
• RS232 programming port
Used for local programming &
setup
• DB9 female DCE
38,400 bps
Relay output
• 1 Form–C Normally Open/
Normally Closed
• Relay Rating: 1 Amp
30VAC/24VDC
Local Indicators:
• Inputs 1–8 Alarm Status LEDs
• System On LED
• Power Alarm LED
• Phone LED
• Battery OK LED
• Output LED
Why choose the
2
000
?
• Data logging -
• Supports multiple sites back
to a single computer
• Uses a standard phone line
When multiple remote sites need to be
monitored and data logged, the Sensaphone
2000 makes it easy
Description Part Number
Sensaphone 2000 in NEMA 4X enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-2000-E
Ethernet Kit for Sensaphone 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0300