Product guide

Sensaphone
Monitoring Systems
Sensaphone
Monitoring Systems
22 WWW.SENSAPHONE.COM
WWW.SENSAPHONE.COM
23
SENSAPHONE
Monitoring Solution
Wireless Sensor Features:
• Up to 30 wireless sensors
reporting back to the main unit.
• Sensors can be up to 300 feet
away.
• Creates its own Mesh Network
so that sensors can be used as
repeaters and routers.
• The Wireless sensors can operate
on standard AA batteries for up to
3 years.
• All sensors are supervised with
their battery level reported and
monitored.
• If any sensor has a low battery
or drops offline, a diagnostic
alarm is generated and users are
contacted.
Alarm Notification:
• Eight User Profiles can be
programmed with 4 Contact
Methods for each one, for a total
of 32 alarm notifications.
• Each Contact Method can be an
e-mail or a text message.
• When used in a data center
environment, alarms can also
be sent directly to Network
Management Software using
SNMP traps
Built In Alarms:
• Power Failure
• Low Backup Battery
• Sensor Diagnostics for low sensor
battery or sensor not responding.
Advanced Scheduling and
Selection:
• Each sensor can be programmed
with a schedule so that it is only
monitored for alarms when you
need it.
• Even the alarm delivery to the
users can be scheduled so that
different people are notified for
alarms depending on time of day
and day of the week.
• In addition to the flexible
scheduling options, there is
also the ability to have different
people notified for different
alarms. So, only the people
responsible for a particular issue
will be the ones who are notified.
Interfacing
Web Page
The WSG-30 includes a built-in
web server. Just browse to its
web page for all programming,
configuration, and access to
current status. Even alarm
history and data logging can be
easily accessed through the web
interface.
Local Display
For a quick local check of the
sensors, there is a 4 line display
and keypad interface right on the
front. The status of all sensors
can be easily and quickly viewed
at anytime without the need for a
computer.
Modbus Protocol
Support for the Modbus protocol
is included in the WSG-30. Third
party automation software can be
used to connect and pull data for
all sensor values in real time.
SNMP Management
The WSG-30 also allows full
remote management using the
SNMP protocol. All status
values as well as programming
parameters can be accessed using
Get and Set commands from
standard network management
software.
Data Logging:
• Up to 64,000 time stamped
records can be stored inside
the WSG-30 to follow history
and trends of the monitored
conditions.
• Data log history can be accessed
directly through the built-in web
page, exported in a standard
format, or interfaced using XML.
Battery Backup:
• The WSG-30 main unit includes
an internal battery backup system
that will power the device for up
to two hours in case of a power
failure.
WSG-30
Web based monitoring
with wireless sensors
Description Part Number
WSG-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FGD-WSG30
Rechargeable
Batteries
E–Mails
Text Messages
SNMP Traps
Modbus
Ethernet
Web Page
..............
Up to 30
Wireless Sensors
Description
Introducing the new Sensaphone
Wireless Sensor Gateway system.
The WSG-30 is a unique wireless
sensor monitoring system that can
be used in more than one way.
As a standalone system, it can
monitor a variety of conditions
from the wireless sensors and
directly notify the appropriate
personnel by sending e-mails and
text messages. The convenience of
having wireless sensors allows you
to move your sensors around while tracking down heat problems within a data
center. The WSG-30 is perfect for monitoring refrigerators and freezers for food
and medical applications where running wires may be inconvenient or costly.
The WSG-30 can also be used within
an existing industrial automation
system and communicate directly
with existing HMI software using the
Modbus protocol. New sensors and
transducers can be sent wirelessly
to the WSG-30 main unit and then
into your automation software. The
WSG-30 is even smart enough to
supply wireless sensor data to your
existing automation software, and
still independently send e-mail and
text message alarm notifications on
its own.
Why choose the
WSG-
3
0
?
•When running sensor wires is
too expensive and/or inconvenient
• When the monitoring
environment is very dynamic with
sensing needs changing often.
• To transmit sensor information
wirelessly to an existing HMI
system.
Wireless Sensors
Coming
Soon
Up to 30 wireless sensors can be
monitored by the WSG-30 in
addition to automatic power failure
alarm detection and diagnostic alarms.
Battery backup is also built in.
Available Wireless Sensors:
• Temperature • Humidity
• Dry Contact • 4-20mA
• Zone Water Detection
• Spot Water Detection
• Power Failure
The WSG-30’s built-in web server provides program-
ming, confi guration, and access to current status. Even
alarm history and data logging can be easily accessed.
The WSG-30 is smart
enough to supply wireless
sensor data to your existing
automation software