Users manual

1-5
Chapter 1: Introduction
Related Publications
Ladder logic programming and C-programming are widely used languages. This manual does
its best to present these topics as they apply to the SCADA 3000; however, there are numerous
textsavailablewhichprovideextensiveinformationspecifictoladder&C-programming.
Each I/O module comes with its own documentation for insertion into this binder. For your
convenience, the documentation for each separate module includes a labeled divider to provide
fast&easyaccesstothatsection.
For the latest technical information check our website at www.sensaphone.com
Technical Support
If any questions arise upon installation or operation of the SCADA 3000, please contact
Phonetics Technical Service Department at the number shown below and have the following
information:
• DateofPurchase___________________
• SerialNumber _____________________ (bottomofunit)
• Firmwareversion_________/__________ (while on-line, click Diagnostics>Processors)
COMM CONTROL
• PCSoftwareVersion_________________(whilerunningthesoftware,click
Help>About)
Technical Support is available from 8:00 AM to 5:00 PM, EST. You may also e-mail your ques-
tions to [e-mail]
Sensaphone.
901 Tryens Road
Aston, PA 19014
Phone: [phone]
Fax: [phone]
www.sensaphone.com
Chapter 1: Introduction