Instructions / Assembly
Table Of Contents
- Chapter 1: Introduction
- Feature Summary
- Chapter 2: Installation
- 2.1 Operating Environment
- 2.2 Mounting
- 2.3 Power Surge Protection
- 2.4 Power Supply and Battery Backup
- 2.5 Starting the Model 400
- 2.6 Run Mode and Standby Mode
- 2.7 Telephone Line
- 2.8 The Microphone
- 2.9 Alert Zones
- 2.10 Installing the Sensor
- 2.11 Multiple Sensors
- 2.12 Outdoor Wiring
- 2.13 Disconnecting the Model 400 for Storage or Seasonal Use.
- Chapter 3: Quick Start
- Chapter 4: Communications Programming
- 4.1 Voice Messages
- 4.2 The Unit ID Number
- 4.3 Dial-out Telephone Numbers
- 4.4 Dial-Out Test Mode
- 4.5 Tone or Pulse Dialing
- 4.6 Special Dialing
- 4.7 Rings Until Answer
- 4.8 TAD (Telephone Answering Device)
- 4.9 Listen-in Time
- 4.10 Call Delay
- 4.11 Local Voice Mute
- 4.12 Voice Repetitions
- 4.13 Intercall Time
- 4.14 Maximum Number of Calls (Max Calls)
- 4.15 The Clock
- 4.16 The Security Code
- Chapter 5: Alarm Programming
- 5.1 Zone Configuration
- 5.2 Enable/Disable Zones
- 5.3 Zone Recognition Time
- 5.4 Establishing High and Low Temperature Limits
- 5.5 Temperature Scale
- 5.6 Temperature Calibration
- 5.7 Obtaining Current Temperature
- 5.8 AC Power Monitoring Enable/Disable
- 5.9 AC Power Failure Recognition Time
- 5.10 Sound Alarm Monitoring
- 5.11 High Sound Alarm Enable/Disable
- 5.12 Exit Delay
- 5.13 Designating A Zone As Unused
- Chapter 6: Acknowledgment, Status Report & Remote Access
- Chapter 7: Operation
- Chapter 8: Controlling the Output
- Appendix A: Weekly Testing Procedure
- Appendix B: Troubleshooting
- Appendix C: 400 QUICK REFERENCE
- Appendix D: Accessories
- Appendix E: Specifications
- Appendix F: Returning the Unit for Repair
- Appendix G: Test Log