User Manual

Chapter 8: Sensors
111
WSR-0101 WIRELESS INDOOR DRY CONTACT SENSOR
INTRODUCTION
The WSR-0101 Wireless Indoor Dry
Contact sensor is designed to work with
the Sensaphone 2800 Environmental
Monitoring System. This sensor includes
a built-in radio transmitter and input
terminals for connecting to any normally-
openornormallyclosedoutput.(Useof
this device with solid-state outputs is not
recommended.)Thesensorcomeswith
3 AAA alkaline alkaline batteries which
will power the sensor for up to 3 years.
An optional plug-in power supply is
also available in which case the batteries
become a backup if main AC power fails.
NOTE: Do not install the entire sensor housing in a dirty,
humid, or corrosive environment. Do not install the sensor
incloseproximitytoother2.4GHzdevices(WiFietc).Do
not install the device inside of a metallic enclosure as this
will impede it’s ability to wirelessly communicate with the
Sensaphone 2800 unit.
Package Contents
(1)WSR-0101WirelessIndoorDryContactSensor
(3)AAAAlkalinebatteries
(2)Plasticdrywallanchors
(2)#6Metaltappingscrews
(1)1/16”hexkey