Specifications

IMS Sensors & Accessories
67www.sensaphone.com
Sensaphone IMS-4000 Node for Wireless Sensors
IMS Wireless Sensors
IMS Wireless Expansion
Product Name Part Number
Sensaphone IMS-4000 Receiver Node for Wireless Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4200
The IMS-4000 Receiver Node for Wireless Sensors extends the
environmental monitoring capability of your IMS-4000 system by
implementing Wireless Sensor technology. The Receiver Node can work
with up to 8 wireless sensors. The unit will wirelessly communicate
with the sensors, then transmit their status back to your IMS-4000 host
via its Ethernet connection. Wireless sensors are available to monitor
Temperature, Humidity, Water on the Floor, Power, Dry Contacts, and
4-20mA signals. The sensors use mesh networking technology to create
multiple communication paths between the sensors and the Receiver
Node to ensure reliable communications. Sensors can also be battery
powered for those installations where an outlet may not be available. A
LCD is provided to show the status of all wireless sensors. The unit is
powered by a plug-in adapter and has a 6V 1.3 AH rechargeable backup
battery located inside the enclosure. Circuitry in the unit will maintain
precise charging of the battery system.
Features & Specications
Number of Wireless Inputs 8
Input Types IMS Wireless Solution
Operating Temperature Range 32° to 122°F | 0° to 50°C
Wireless Range Up to 250’ | 72m indoor
Wireless Sensor Frequency ISM 2.4GHz
Transmit Power Output 100mW (20dBm)
Internal Monitoring AC power, battery backup
Local Access 80 character backlit LCD display
Power Supply Plug in power supply also monitors for power failures
Internal battery backup
Physical 7.6 x 5.1 x 2” | 190 x 130 x 50mm • 1.75lbs | .8kg
Warranty 3 Years
Wireless Temperature Sensor Wireless Ultra Low Temperature Sensor
Wireless Humidity Sensor Wireless Power Failure Sensor
Wireless Dry Contact Bridge Wireless 4-20mA Bridge
Wireless Spot Water Detection Sensor Wireless Zone Water Detection Sensor
This wireless temperature sensor measures ambient air
temperatures from 32° to 115° | 0° to 57°C.
Transmits actual humidity levels to the IMS unit for
programmable high and low alarm limits.
The Wireless Dry Contact Bridge provides remote contact
monitoring without running wires.
This sensor has four probes on the bottom of the enclosure
which will trigger an alarm when any adjacent pair get wet.
This sensor comes with 10’ of leak detection cable which
triggers an alarm when it gets wet.
Includes an external temperature probe and is intended for
monitoring temperatures in refrigerators and freezers.
Includes a plug in power supply that monitors for loss of
power. Runs on batteries if power does go out.
The sensor provides monitoring of 4-20mA transducers. A
24V DC supply is built in to power the current loop.
IMS Wireless Temperature Sensor . . . . . . . . IMS-4210
IMS Wireless Humidity Sensor . . . . . . . . . . . IMS-4211
IMS Wireless Dry Contact Bridge . . . . . . . . . IMS-4212
IMS Wireless Spot Water Detection Sensor . . IMS-4215 IMS Wireless Zone Water Detection Sensor . . IMS-4216
IMS Wireless Ultra Low Temperature
Sensor with External Probe . . . . . . . . . . . .IMS-4210-E
IMS Wireless Power Failure Sensor . . . . . . . . IMS-4213
IMS Wireless 4-20mA Bridge . . . . . . . . . . . . IMS-4214
Sensor Temperature Range 32° to 115°F | 0° to 57°C
Accuracy ± 1°F | ±.56°C
Humidity Range 5 to 90%RH
Accuracy 3%
Input Characteristics 3MΩ to 3V
Operating Range 32° to 115°F | 0° to 57°C
Operating Humidity Range 5–90%
Operating Range 32° to 115°F | 0° to 57°C
Water Rope Length 10’ | 3m
Water Rope Expansion Up to 10 ropes
Temperature Range -109° to 122°F | 85° to 50°C
Accuracy ± 1.8°F | ±1°C
Operating Range 32° to 115°F | 0° to 57°C
Range Up to 250’ | 76m
Input Load 260 Ohms
Loop Current 20mA Max
Wireless Sensors
The Sensaphone IMS Wireless Sensors sensors communicate with the Wireless
Node via an integrated 2.4GHz wireless radio. The devices can transmit a signal up
to 250’ | 75m indoors and even greater distances line of site. The sensors come with
3AA batteries which will power the sensors for 2 years. An optional power supply is
also available, in which case batteries function as backup power .