Specifications
IMS Monitoring Systems
59www.sensaphone.com
Sensaphone IMS-4000 Expansion Sensaphone IMS-4000 Expansion
IMS -4000 Node IMS Accessories
Product Name Part Number
Sensaphone IMS-4000 Enterprise Monitoring Node Expansion Unit . . . . . . . . . . . . . . . . . . . . . . . . IMS-4002
The IMS-4000 Node allows IMS-4000 users to expand their
infrastructure and monitor additional inputs in locations away from
the IMS-4000 Host. Up to thirty–one Nodes can be used with each
IMS-4000 Host. Much like the Host, the Node can monitor eight
inputs for environmental conditions and or alarm contacts from other
computer equipment such as UPS systems. The Node connects to the
Host via a RJ-45 10/100BASE-T Ethernet and is monitored via the
ConsoleView software included with the Host.
IMS-4000 Dual Relay Output Module
IMS-4000 Dry Contact Node
The IMS-4310 Dual Relay Output Module allows you to control two devices from any IMS-4000
Host or Node. Each output may be controlled either manually or automatically. Each output has
the option of providing either a dry relay contact or 12VDC power. Two switches located inside the
device select the output type.
The IMS-4000 Dry Contact Node provides eight dry contact inputs (normally open/normally closed) and works in conjunction with the IMS Host. The
device communicates with the IMS-4000 Host via its Ethernet connection. The Dry Contact Node is a cost-effective solution when your application
only requires monitoring of dry contacts. With this device you do not need to use Dry Contact Bridges, thus reducing cost, installation time, and space.
This device includes four AA rechargeable NiMH batteries for power backup in the event of a power failure. Both main power and battery charge are
monitored and can be programmed to trip alarms as well. The unit comes in a black plastic enclosure with tabs for wall mounting. Rubber feet are also
included for placement on a shelf/desktop.
Part Name Part Number
IMS-4000 Dual Relay Output Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4310
Part Name Part Number
IMS-4000 Dry Contact Node . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IMS-4010
Number of Inputs 8
Input Types Dry Contact, Normally Open or Normally Closed
Internal Monitoring AC Power, Backup Battery
Local Access Power LED, Ethernet LEDs
Operating Temperature 32°to 122°F | 0° to 50°C
Power Supply Plug in power supply
Built in battery backup
Physical 7.3 x 5.5 x 1.5” | 185 x 140 x 381mm
2lbs | .9kg
Power Consumption 2.5W
IMS Outlet Switching
IMS-4000 PowerGate & PowerGate2
The IMS-4000 PowerGate units allow you to manually or automatically switch up
to 8 electrical outlets from the IMS-4000 ConsoleView Software or the IMS-4000
web page. This gives you the ability to remotely turn-on, turn-off, or cycle power
to remote equipment. You can also program the system to automatically control the power to a device based on an alarm condition. The PowerGate
has eight LEDs on the front panel to indicate outlet status and a 15 Amp circuit breaker for safety. It can switch a total of up to 12 amps of current at
120VAC 60Hz (all outlets combined). The PowerGate2 features individual power input circuits for each outlet thus giving you the ability to distribute
the power load across multiple circuits. Two of the outlets can switch up to 10 amps (120VAC 60Hz) and the other six can switch up to 4 Amps.
Part Name Part Number
IMS-4000 PowerGate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMS-4301
IMS-4000 PowerGate2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IMS-4302
Number of Inputs 8
Input Types IMS Solution
Remote Access Console View Software and, or website to access
status and programming
Local Access LEDs to show ethernet connectivity, and power
alarms. RS-232 serial port for local conguration
Power Supply Plug in power supply also monitors for power
failures. Built in battery backup
Physical 9.6 x 1.75 x 7” | 482 x 44 x 241mm
7.4lbs | 3.3kg
Warranty 3 Years