Specifications

Accessories & Sensors
51www.sensaphone.com
Sensaphone 2800 Wireless Sensors Sensaphone WSG30 Wireless Sensors
Now you can monitor critical conditions at remote locations without
running wires. Based on proven Sensaphone remote monitoring
methods, the 2800 adds the ability to read sensor status from wireless
sensors, and not just simple on/off status or open/closed conditions. The
wireless technology includes full analog capability so real world values
can be monitored, like actual temperatures, real tank levels, and
 ow rates.
The Sensaphone 2800 can accept up to four wireless sensors. A variety
of wireless sensor types are available to choose from in addition to two
wireless interface modules. The interface modules allow you to connect to
existing equipment and transmit their status back to the 2800.
The 2800 Wireless Sensors all include a built in radio transmitter and
run on AA or AAA batteries which will power the sensors for up to three
years. An optional plug-in power supply is also available. The batteries
become a backup if main AC power fails. The wireless sensors can be
placed up to 300’ | 91m away from the 2800 or even farther with the use
of a repeater.
The Sensaphone WSG30 also offers monitoring critical conditions at
remote locations without running wires. Based on proven Sensaphone
remote monitoring methods, the WSG30 has the ability to read sensor
status from wireless sensors. And not just simple on/off status or open/
closed conditions. The wireless technology includes full analog capability
so real world values can be monitored, like actual temperatures, real tank
levels, and  ow rates.
The Sensaphone WSG30 can accept up to thirty wireless sensors. A
variety of wireless sensor types are available to choose from in addition
to two wireless interface modules. The interface modules allow you to
connect to existing equipment and transmit their status back to
the WSG30.
The WSG30 Wireless Sensors all include a built in radio transmitter and
run on AA batteries which will power the sensors for up to two years. An
optional plug-in power supply is also available if one isn’t supplied with
the sensor. The batteries become a backup if main AC power fails. The
wireless sensors can be placed up to 300’ | 91m away from the WSG30
or much farther with a line of sight. The sensors also can create a mesh
network that would expand the wireless sensor range.
Temperature Sensor
Includes a temperature element for monitoring
temperatures wherever the device is installed. The internal
element can be replaced with a remote temperature probe so
that measurements can be made inside a harsh environment
such as a refrigerator or freezer.
2800 Wireless Temperature Sensor . . . . . . . . . .WSR-0100
Dry Contact Bridge
Includes input terminals for connecting to any
normally-open or normally-closed output. Use of this device
with solid state outputs is not recommended.
2800 Wireless Dry Contact Bridge . . . . . . . . . . . WSR-0101
Power Failure Sensor
Includes a wall plug in power supply that will detect the loss
of power at the outlet where the power supply is attached.
Three AAA batteries will power the sensor and allow it to
transmit alarms in the event of a power outage.
2800 Wireless Power Failure Sensor . . . . . . . . . . WSR-0102
Humidity Sensor
Includes a humidity sensor element for monitoring humidity
from 0 to 95% wherever the device is installed.
2800 Wireless Humidity Sensor . . . . . . . . . . . . . WSR-0103
4-20mA Bridge
Includes a 4-20mA input and 24V loop power supply. The
sensor can be used to monitor the output of any 4-20mA
transducer. Comes with plug in power supply.
2800 Wireless 4-20mA Bridge . . . . . . . . . . . . . . WSR-0104
Motion Detection Sensor
This sensor detects motion of heat sources using infrared
sensing technology.
2800 Wireless Motion Detection Sensor . . . . . . .WSR-0105
Water Detection Sensors
Includes water sensing probes for monitoring the presence
of water at a particular location. The Zone Water Detection
Sensor comes with ten feet of water sensing cable. Additional
lengths can be added to increase monitored area.
2800 Wireless Spot Water Detection Sensor . . . .WSR-0106
2800 Wireless Zone Water Detection Sensor . . . . WSR-0107
Wireless Repeater
Allows greater distances between wireless sensors and the
Sensaphone 2800. A more powerful radio transceiver can
transmit up to 300’ indoors and up to 4,000’ (line-of-sight).
Only one repeater can be used per Sensaphone 2800.
2800 Wireless Repeater . . . . . . . . . . . . . . . . . . WSR-0199
WSG
Wireless
Temperature Sensor
Includes a temperature element for monitoring
temperatures wherever the device is installed. This sensor
will monitor temperatures from 32° to 115°F | 0° to 46°C.
WSG Wireless Temperature Sensor . . . . . FGD-WSG30-TMP
WSG
Wireless
Temperature Sensor w/ Probe
Includes a temperature probe for monitoring in a harsh
environment such as a refrigerator or freezer. The sensor
will monitor temperature from -109° to 115°F | -85° to 46°C.
In temperatures below -20°F use part number FGD-WSG30-TEX85.
WSG Wireless Temperature Sensor w/
External Probe . . . . . . . . . . . . . . . . . . . FGD-WSG30-TEX
WSG Wireless Ultra Low Temperature
Sensor w/External Probe . . . . . . . . . . .FGD-WSG30-TEX85
WSG
Wireless
Dry Contact Bridge
Includes input terminals for connecting to any
normally-open or normally-closed output. Use of this device
with solid state outputs is not recommended.
WSG Wireless Dry Contact Bridge . . . . . . FGD-WSG30-DRY
WSG
Wireless
Humidity Sensor
Includes a humidity sensor element for monitoring humidity
from 0 to 95% wherever the device is installed.
WSG Wireless Humidity SensorFGD-WSG30-HUM
WSG
Wireless
Power Failure Sensor
Includes a wall plug in power supply that will detect the loss
of power at the outlet where the power supply is attached.
Two AA batteries will power the sensor and allow it to
transmit alarms in the event of a power outage.
WSG Wireless Power Failure Sensor . . . . FGD-WSG30-PWR
WSG
Wireless
4-20mA Bridge
Includes a 4-20mA input and 24V loop power supply. The
sensor can be used to monitor the output of any 4-20mA
transducer. Comes with plug in power supply.
WSG Wireless 4-20mA Bridge . . . . . . . . . FGD-WSG30-4-20
WSG
Wireless
Spot Water Detection Sensor
Includes water sensing probes for monitoring the presence
of water at a particular location.
WSG Wireless Spot Water
Detection Sensor . . . . . . . . . . . . . . . . FGD-WSG30-SPOT
WSG
Wireless
Zone Water Detection Sensor
Includes 10’ of water sensing cable for monitoring for the
presence of water in a particular area. Additional lengths
can be added to increase the monitored area.
WSG Wireless Zone Water
Detection Sensor . . . . . . . . . . . . . . . . FGD-WSG30-ZONE