Specifications
Accessories & Sensors
44 www.sensaphone.com
Sensaphone Water Detection Sensors Sensaphone Power Sensors
Contact
Series
Spot Water Detection Sensor
Contact
Series
Zone Water Detection Sensor
Connection Hardwired
Housing
Black plastic
Sensor Series Contact Series
Dimensions 2.2 x 1.3 x 3.6” | 57 x 28 x 92mm
Connection Hardwired
Housing
Black plastic
Sensor Series Contact Series
Dimensions 5.5 x 3.3 x 1.4” | 140 x 83 x 33mm
This water detection sensor can be used with all Sensaphone models to detect the presence of water on a horizontal surface. It is powered by internal
batteries which last for 3 to 5 years. When the batteries start to run down, the sensor will automatically cause an alarm when no water is present.
Multiple sensors can be wired in series to a single input.
The Sensaphone Zone Water Detector is for use in detecting the presence of water on a oor or in a false ceiling. It comes with 10’ of WaterRope
capable of covering a larger area than the FGD-0013 water sensor. Up to ten Water Ropes can be cascaded from a single sensor for even greater
coverage. Works with all Sensaphone products and operates on two AA batteries.
Part Name Part Number
Contact Type Spot Water Detection Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0013
Part Name Part Number
Contact Type Zone Water Detection Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0056
Water Rope Extension for Zone Water Detection Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0063
Contact
Series
Float Level Switch
Operating Temperature Range -10° to 80°F | -23° to 26°C
Housing
Black plastic
Sensor Series Contact Series
Dimensions 3.5 x 1.5” | 89 x 38mm
The FGD-0222 oat switch is a plastic side mounted oat switch. It is cost effective for level control applications in small tanks where it is more
convenient to install a level switch through the sidewall of the tank. This style oat switch can be rotated for Normally Open or Normally Closed
operation. Combine two switches at different levels for high and low level or pump control or alarming.
Part Name Part Number
Contact Type Float Level Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0222
Accessory
Series
24VDC Power Supply for 4-20mA Sensors with Battery Backup
Accessory
Series
24VDC Power Supply for 4-20mA Sensors
Battery Backup Duration Up to 8 hours
Power 24V / 40mA will power two devices
Sensor Series Accessory Series
Dimensions 7.5 x 3.6 x 1.2” | 190 x 92 x 31mm
Power 24V / 250mA
Sensor Series Accessory Series
4-20mA transducers require power to operate. Some Sensaphone products provide 24VDC power specically for this purpose. When using a 4-20mA
transducer with a model that does not, an external power supply is required. This 4-20mA Power Supply provides up to 8 hours of battery backup if
main power fails.
4-20mA transducers require power to operate. Some Sensaphone products provide 24VDC power specically for this purpose. When using a 4-20mA
transducer with a model that does not, an external power supply is required.
Part Name Part Number
24VDC Power Supply for 4-20mA Sensors w/ Battery Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0070
Part Name Part Number
24VDC Power Supply for 4-20mA Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0053
Contact
Series
PowerOut Alert Power Failure Switch
Operating Temperature Range 40° to 100°F | 4° to 37°C
Time Delay 3 to 8 minutes
Contact Rating .5 Amp @ 30V
Sensor Series Contact Series
Dimensions 2.3 x 3 x 2” | 57 x 76 x 50mm
A compact power outage monitoring device to detect power failures. Easily plugs into any 110 VAC receptacle outlet for operation. Works with all
Sensaphone products. Comes with 15 feet of wire.
Part Name Part Number
Contact Type PowerOut Alert Power Failure Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0054