Specifications
Sensaphone Monitoring Systems
23www.sensaphone.com
Sensaphone SAT4D
Remote Monitoring via Satellite
Features & Speci cations Popular Applications
Product Name Part Number
Sensaphone SAT4D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FGD-SAT4D
Watching over a remote site can be a challenge when the location
is very remote. The Sensaphone SAT4D is designed to monitor
remote sites no matter where they are located. Instead of relying
on phone lines or cell phone services which are not always
available, the SAT4D uses direct satellite communications. The
result is 100% communication coverage across the United States
as well as many other countries. No need to worry about cell
phone coverage maps, which carriers are in the area, or analog vs.
digital support. It works everywhere, plain and simple.
Not only does the SAT4D make your communication easy, but
it also takes away your power source worries, too. The SAT4D
remote monitoring system requires no power at all! Mount it,
connect your dry contact sensors, and walk away. The SAT4D has
an internal battery that will operate for 3 years without power.
Place it anywhere, and only come back every three years to change
the battery.
The Sensaphone SAT4D can monitor up to 4 dry contact inputs
for alarms. When an alarm occurs, programmable messages are
sent to selected personnel by voice phone call or e-mail message.
Satellite
Communication
4 INPUTS
Contact
Series
Communication Method Satellite
Number of Inputs 4
Input Types Contact Type
Remote Access Website to access status and programming
Alarm Noti cation 6 e-mails
8 phone calls
Power Supply Satellite transmitter battery:
4 AA lithium batteries
3 year battery life
Input module battery:
1 AA lithium battery
7 year battery life
Physical 10.8 x 13.5 x 5.6” | 270 x 340 x 140mm
7.4lbs | 3.3kg
Operating Conditions -22° to 140°F | -30° to 60°C
-40° to 185°F | -40° to 85°C with battery life impact
Other GPS tracking
Communication service required for operation
Warranty 1 Year
Oil & Gas
Don’t wait to nd out about equipment failure
until the morning. The Sensaphone SAT4D will
call or e-mail as soon as an alarm
condition exists.
Water & Wastewater
Use your Sensaphone SAT4D to monitor
pumps, power failure and other conditions in
water and wastewater applications.
No Power Required
Since the SAT4D is self powered and
requires no phone lines or cell signal, it can
be placed in very remote locations that can
be inconvenient or dif cult to access.
Web Interface
All communications to and from the
SAT4D go through the SAT4D server. You
can check the latest status, check previous
alarm events, or make programming
changes.
Automatic Status Updates
The SAT4D will automatically send two
status reports per day to the website. These
12 hour snapshots remain available on the
SAT4D server for future reference.
WEB SERVER
WEB STATUS
WEB HISTORY
6 E-MAILS
8 VOICE PHONE CALLS
Mounting Options
To make mounting the SAT4D easier a pole mount kit is available. The kit includes
an aluminum pole and mounting hardware that allows you to install the device
anywhere, as long as you can drive the pole three feet into the ground.