Instructions / Assembly

CHAPTER 7: OPERATION

ENABLE/DISABLE ZONES

This command will toggle the selected zone between the enabled or

disabled state.

Description Touch-Tone Command

Enable/Disable Zone * + Z(0) + (zone number)

SET AND RECITE HIGH & LOW ALARM LIMITS

The following commands are used to set or recite the Low Alarm Limit

for any Zone.

Description Touch-Tone Command

Set Zone Low Limit S(7) + L(5) + (zone number) + (value) + #

Description Touch-Tone Command

What Is Zone Low Limit W(9) + L(5) + (zone number)

The following commands are used to set or recite the High Alarm Limit

for any Zone.

Description Touch-Tone Command

Set Zone High Limit S(7) + H(4) + (zone number) + (value)+ #

Description Touch-Tone Command

What Is Zone High Limit W(9) + H(4) + (zone number)

SET AND RECITE TELEPHONE NUMBERS

The following commands will allow you to program and recite dialout

telephone numbers. You may need to use the Special Dialing Codes below.

SPECIAL DIALING CODES SUMMARY

Code 1: Numeric pager type

Code 2: Wait for answer

Code 3: Change to Touch-Tone

Code 4: Pause

Code 5: *

Code 6: #

Description Touch-Tone Command

Setting a phone number S(7) + T(8) + (entry 1–8) + (telephone

number) + #

Description Touch-Tone Command

Reciting a phone number W(9) + T(8) + (entry 1–8)