Manualshelf

Instructions / Assembly

ManualsBrandsSensaphone ManualsHVAC Parts & Accessories1800 Series 8 Channel Remote Monitoring System with Clear Door
71727374757677787980
74
SENSAPHONE 1800 User’s Manual
Mode 7: Output on when zone 7 goes into alarm. Off when alarm is
acknowledged.
Mode 8: Output on when zone 8 goes into alarm. Off when alarm is
acknowledged.
Mode 9: Output on when a Sound alarm occurs. Off when alarm is
acknowledged
Mode 10: Output on when any alarm occurs. Off when all alarms are
acknowledged.
Mode 0: Output on when a Power alarm occurs. Off when alarm is
acknowledged.
MANUAL MODE
Mode 11: Output controlled manually via keypad command or touch-tone
telephone.
When programmed for Manual mode, the command to switch the output
is:
SENSOR ON/OFF + OUTPUT.
SENSOR
ON/OFF
OUTPUT
The 1800 will respond “ON” or “OFF” to indicate the state of the output.
If the 1800 says “Error,” the output is not programmed for manual
mode.
To program the Output Mode:
1. Press the SET key.
SET
2. Press the OUTPUT key.
OUTPUT
The 1800 will say “Enter output mode.”