Instructions / Assembly

72
SENSAPHONE 1800 User’s Manual
CALLBACK ACKNOWLEDGMENT
This is an optional feature that can be enabled using the keypad
(default=disabled). It allows an alarm to be acknowledged simply by call-
ing the unit and letting the line ring 10 times. When this feature is enabled
it will temporarily make the Rings Until Answer set to 10 when an unac-
knowledged alarm exists. If you receive a call via Voice or Pager and are
unable to send touch-tones, you can call the unit back, let the line ring 10
times, and the unit will answer and say “...Alarm Acknowledged.”
If TAD is also enabled, then you must call the 1800, let it ring once,
hang up, and then call the unit back within 30 seconds. The unit will
answer on 1 ring and acknowledge the alarm.
To Enable the Callback Acknowledgment Feature:
1. Press SENSOR ON/OFF.
SENSOR
ON/OFF
2. Press CODE.
CODE
The 1800 will say “Callback Acknowledgment Enabled/Disabled” to indicate
that Callback Acknowledgment is enabled. Repeat the key sequence to dis-
able.