Instructions / Assembly

CHAPTER 5: COMMUNICATION PROGRAMMING
71
2. Press the LOCK key.
ENTER
LOCK
The 1800 will recite the security code.
To remove the security code:
1. Press the SET key.
SET
2. Press the LOCK key.
ENTER
LOCK
The 1800 will say “Enter security code.”
3. Press ENTER.
ENTER
LOCK
The 1800 will say “Security code erased.”
SPEAKER MUTE
When the 1800 dials out with an alarm, it recites the alarm message over
the phone and at the monitor site. The Speaker Mute command allows you
to silence the 1800 at the monitor site.
To Mute the speaker:
1. Press the SENSOR ON/OFF key.
SENSOR
ON/OFF
2. Press the MUTE key
HISTORY
MUTE
The 1800 will say “Mute On” to indicate that the speaker mute is on. It will
say “Mute Off ” to indicate when the speaker mute is off.
3. Repeat key sequence to change.