Instructions / Assembly

70
SENSAPHONE 1800 User’s Manual
REMOTE PROGRAMMING SECURITY CODE (LOCK)
The 1800 can be locked to prevent unauthorized call-in access to its program-
ming. You may, however, listen to a status report without unlocking the 1800.
To remotely edit programming parameters or record messages, you must call
in and unlock the 1800 by entering the four-digit lock/unlock code.
If you enter the correct code, you will gain access to the 1800 to use the
phone commands. If you enter the incorrect code, the 1800 will say “Error
2” and allow you a second chance to enter the correct code. If the second
attempt is also wrong, the unit will say “Error 2, good-bye” and disconnect.
You cannot program or change the lock code remotely.
For an explanation of how to use remote programming, see Chapter Seven.
To set the security code:
1. Press the SET key.
SET
2. Press the LOCK key.
ENTER
LOCK
The 1800 will say “Enter security code.”
3. Using the number keys, enter 4 digits, and press ENTER.
1
CALL
DELAY
4
MAX
CALLS
7
RECOGNITION
TIME
8
RESET
TIME
0
ID
POWER
9
LISTEN TIME
SOUND
5
ALARM
LIMITS
6
2
VOICE
REPS
3
INTERCALL
TIME
CALIBRATE
ENTER
LOCK
The 1800 will say “OK.”
To play back the security code:
1. Press the WHAT IS key.
WHAT IS